Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Aimtrak with Dual Monitor Setup  (Read 3038 times)

0 Members and 1 Guest are viewing this topic.

sdarcade13

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:March 13, 2020, 06:12:35 pm
  • I want to build my own arcade controls!
Aimtrak with Dual Monitor Setup
« on: March 13, 2020, 03:27:41 pm »
I just received two Aimtrak light guns. I am unable to get them calibrated when using two monitors within Windows 10. The second monitor is typically used as a marquee display. Thanks for the assistance.

Logged

Titchgamer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4222
  • Last login:December 17, 2023, 08:05:48 am
  • I have a gaming addiction.....
Re: Aimtrak with Dual Monitor Setup
« Reply #1 on: March 13, 2020, 04:48:24 pm »
Where is your bar positioned?
Logged

sdarcade13

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:March 13, 2020, 06:12:35 pm
  • I want to build my own arcade controls!
Re: Aimtrak with Dual Monitor Setup
« Reply #2 on: March 13, 2020, 06:12:35 pm »
It is above the main monitor. The problem is that the calibration runs on both screens, not just the one. The main monitor is a 27 inch in a cabinet with a 7 inch monitor up higher on the cabinet.Which is used as a marquee display.
Logged

Titchgamer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4222
  • Last login:December 17, 2023, 08:05:48 am
  • I have a gaming addiction.....
Re: Aimtrak with Dual Monitor Setup
« Reply #3 on: March 13, 2020, 06:28:39 pm »
Hmm that is indeed a doozy.
I wonder if you can disable the mouse for the second screen somehow?
Logged

Drnick

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1642
  • Last login:June 21, 2024, 03:32:31 pm
  • Plodding Through Life
Re: Aimtrak with Dual Monitor Setup
« Reply #4 on: March 19, 2020, 12:53:02 pm »
Can you not disable the marquee monitor within windows, do the calibration and then enable it again?
Logged

markc74

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 826
  • Last login:Yesterday at 03:03:20 pm
  • Flipping out
    • forum.arcadecontrols.com/index.php/topic,137295.0.html
Re: Aimtrak with Dual Monitor Setup
« Reply #5 on: March 19, 2020, 04:46:06 pm »
That's the same layout as mine. Pretty sure the 2and monitor being on has no impact on calibration.

When calibrating it only appears on the main crt
Logged

Arroyo

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1558
  • Last login:June 19, 2025, 01:51:14 pm
  • Budgets are boring
    • newforum.arcadecontrols.com/index.php/topic,156267.0.html
Re: Aimtrak with Dual Monitor Setup
« Reply #6 on: March 19, 2020, 06:02:04 pm »
Andy at Ultimarc had discussed this in another thread (don’t remember where).  Apparently dual monitor setups (like with a dynamic marquee) causes problems in Windows 10 with 2 guns.  Apparently Windows 7 is fine....
Logged
Pages: [1]
  
Go Up
« previous next »