Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: RGBcommander causes sticky player 1 start key  (Read 1703 times)

0 Members and 1 Guest are viewing this topic.

HowardAbraham

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:September 21, 2016, 11:44:55 pm
  • I want to build my own arcade controls!
RGBcommander causes sticky player 1 start key
« on: September 21, 2016, 11:44:55 pm »
My environment:
Raspberry Pi 3
Ultimarc Ultimate I/O
RetroPie 4.0.2

When I install RGBcommander .3 it seems to alter the behavior of my player one start (1) key.  If I press it one time it will autorepeat hundreds of times, then stop.  This effectively disables my shift-key functions, such as escape.  When I uninstall RGBcommander the problem stops.

You can see me demonstrate this in the video found here:
https://drive.google.com/open?id=0BwITVe4WOoaqSHN4M01VLTA1c2s

nordemoniac

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 284
  • Last login:September 26, 2023, 02:41:28 am
  • Weee! Hahaha...
Re: RGBcommander causes sticky player 1 start key
« Reply #1 on: September 28, 2016, 04:44:55 am »
Seems like a hardware problem for me.

Have you checked the wiring, tried disconnecting some wires?

ZoOl007

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 161
  • Last login:August 02, 2020, 12:03:38 pm
    • RGBcommander
Re: RGBcommander causes sticky player 1 start key
« Reply #2 on: September 28, 2016, 01:35:11 pm »
His firmware is 1.32 - we've been mailing and I've been putting some time in it and this is my conclusion

Hi,

mine is 1.32 also. I can not reproduce your issue no matter what I try. The animation is running and I tried P1Start (and other pins) mapped to several things. Removal, install, whatever you like... brutally disconnect, reattach, with real keyboard and mouse, without...
The .3 functions as designed. This is conclusive for me and as such I reason that the software is not at fault.
I do hope you find a solution for your issue.

All the best.

now back to coding .4  ;D


PhiDeltCraiger

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 17
  • Last login:March 28, 2018, 12:58:36 pm
Re: RGBcommander causes sticky player 1 start key
« Reply #3 on: October 01, 2016, 02:16:14 pm »
Very much looking forward to the .4 version. Thank you for your efforts!