Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: WG 1901?, HV Shutdown  (Read 2048 times)

0 Members and 1 Guest are viewing this topic.

kardenm

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 181
  • Last login:June 13, 2019, 09:14:35 am
WG 1901?, HV Shutdown
« on: September 17, 2014, 09:16:45 am »
Working on a monitor I think is a WG. Printed on board is MTG-2901 MA REV-01 and WG 1901.

When I turn power on I hear HV come on but It immediately fades out or shuts down. Result is no picture and no HV.

I did replace the HOT but result is the same.

Where else should I start to look for this problem?  Help and advice greatly appreciated!
Logged
In theory, there is no difference between theory and practice, but in practice.....there is!!

kardenm

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 181
  • Last login:June 13, 2019, 09:14:35 am
Re: WG 1901?, HV Shutdown
« Reply #1 on: September 20, 2014, 09:44:43 am »
Anyone??
Logged
In theory, there is no difference between theory and practice, but in practice.....there is!!

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 25, 2025, 09:21:43 am
Re: WG 1901?, HV Shutdown
« Reply #2 on: September 20, 2014, 11:22:15 am »
the mtg-2901 is a tovis monitor,probably rebranded as vision pro
never heard of a wg 1901

do you have a photo of the chassis?
Logged

kardenm

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 181
  • Last login:June 13, 2019, 09:14:35 am
Re: WG 1901?, HV Shutdown
« Reply #3 on: September 21, 2014, 03:14:10 pm »
No but I'll get one tomorrow.  Thanks.
Logged
In theory, there is no difference between theory and practice, but in practice.....there is!!

kardenm

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 181
  • Last login:June 13, 2019, 09:14:35 am
Re: WG 1901?, HV Shutdown
« Reply #4 on: September 23, 2014, 09:09:38 am »
Here are photos of the chassis.
« Last Edit: September 23, 2014, 09:12:18 am by kardenm »
Logged
In theory, there is no difference between theory and practice, but in practice.....there is!!

ed12

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3972
  • Last login:March 31, 2018, 03:44:39 pm
  • it is what it is..."Nobody Said It Was Easy"....
Re: WG 1901?, HV Shutdown
« Reply #5 on: September 23, 2014, 10:55:32 am »
ok theres the first problem
that is not a "true" wg but rather a branded wg
i think that was made by wei
ken layton would know better

ed
Logged
Shipping something from the U.S. to Canada for repair/exchange?  Please use USPS to avoid (additional?/excessive?) shipping charges.  PM me if you have any questions.

kardenm

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 181
  • Last login:June 13, 2019, 09:14:35 am
Re: WG 1901?, HV Shutdown
« Reply #6 on: September 23, 2014, 08:35:10 pm »
Is it possible to say which components might be causing this problem?
If I could narrow it down, I could start testing or replacing stuff.
Logged
In theory, there is no difference between theory and practice, but in practice.....there is!!

ed12

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3972
  • Last login:March 31, 2018, 03:44:39 pm
  • it is what it is..."Nobody Said It Was Easy"....
Re: WG 1901?, HV Shutdown
« Reply #7 on: September 23, 2014, 08:44:08 pm »
ya it is a smps style chassic
so after the switch transformer chk your dc volt's
with ref. to that ground and not your hot ground
let's start there

ed
Logged
Shipping something from the U.S. to Canada for repair/exchange?  Please use USPS to avoid (additional?/excessive?) shipping charges.  PM me if you have any questions.

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: WG 1901?, HV Shutdown
« Reply #8 on: September 23, 2014, 11:20:43 pm »
Tovis MTG-1901 which is a.k.a. Happ Controls "Vision Pro" MTG-1901.

Service Manual:

http://arcarc.xmission.com/PDF_Monitors/Vision_Pro_%28MTG-XX01_Series_13in_and_19in_CGA%29.pdf

Manufacturer's website:

http://www.tovism.com/english/?page_id=35

Logged

ed12

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3972
  • Last login:March 31, 2018, 03:44:39 pm
  • it is what it is..."Nobody Said It Was Easy"....
Re: WG 1901?, HV Shutdown
« Reply #9 on: September 23, 2014, 11:48:10 pm »
thk-u ken

ed
Logged
Shipping something from the U.S. to Canada for repair/exchange?  Please use USPS to avoid (additional?/excessive?) shipping charges.  PM me if you have any questions.

kardenm

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 181
  • Last login:June 13, 2019, 09:14:35 am
Re: WG 1901?, HV Shutdown
« Reply #10 on: September 30, 2014, 02:30:42 pm »
Yes! Thank you so much Ken and ed. I had no info on this chassis. I'll look at this Some more and post what I find.
Logged
In theory, there is no difference between theory and practice, but in practice.....there is!!
Pages: [1]
  
Go Up
« previous next »