Thanks, I prefer G1 as well. I didn’t even realize Starscream was an F-22 in Bayformers until after I started this project.
I joined a transformers forum to share this project in a tutorial form once it is finished. I’ve been reading a lot over there and they seem to be cool with fan made stuff.
My progress will be documented over here though.
Showed it to some people at work and it has been suggested to do a Skywarp and Thundercracker as well. Skywarp would need just silver, purple, and gold paint. Thundercracker would need red, white, blue, silver, and gold paint like Starscream. I am only doing Starscream for now as that is my favorite.
Rough draft of F-22 Screamer tutorial:1. Get Quadcopter/jet
2. Remove body
a. Carefully pry LEDs loose from foam and pull wires out of channels
b. Carefully remove two tiny screws in body mount under sticker on spine
c. Lift body off of Quadcopter and put screws in safe place
3. Use acetone to remove stickers
4. Use alcohol to clean entire body and body mount
5. Follow product instructions for drying time between coats
6. Prime top of body mount with Adhesion Promoter
7. Spray Silver base on top of body mount.
8. Prime entire body with Adhesion Promoter
9. Spray Silver base over entire body.
10. Mask off everything except canopy for Gold paint.
11. Spray Gold canopy
12. Mask off everything but nosecone and rudders
13. Spray Blue
14. Mask of everything except what is White or Red.
15. Spray White.
16. Mask off everything that is White.
17. Spray Red
16. Put back together.