Author Topic: K4600 has vertical collapse after 3-5 minutes. (Read 1180 times)

MTPPC · « **on:** December 15, 2012, 09:24:50 pm »

A friend of mine brought his frogger over to fix the problem in the title. I'm thinking it is a cold solder joint, but I am no expert by any measure. Can anyone point me at a trouble shooting guide or give an idea where to start? I'm thinking to reflow the headers for the yellow and green wires, but I really don't know what else to do (other than a complete visual inspection). Any help is appreciated.

MTPPC · « **Reply #1 on:** December 18, 2012, 02:04:06 am »

Got it fixed. Cold solder joint on the X-Y board header.

Ken Layton · « **Reply #2 on:** December 20, 2012, 11:07:32 am »

That's a very common problem on the 4600 series. Glad you found it and got it fixed.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: K4600 has vertical collapse after 3-5 minutes. (Read 1180 times)

MTPPC

K4600 has vertical collapse after 3-5 minutes.

MTPPC

Re: K4600 has vertical collapse after 3-5 minutes.

Ken Layton

Re: K4600 has vertical collapse after 3-5 minutes.