Author Topic: PS360+ PCBs (Read 8376 times)

jmike · « **on:** June 19, 2012, 07:10:47 am »

Look what arrived yesterday in the mail. (2) PS360+ PCBs.

I only placed the order in March 2011

Hopefully when work slows down I can build a really nice set up with these.
Anyone else stuck around and kept their pre-order?

opt2not · « **Reply #1 on:** June 19, 2012, 03:16:49 pm »

Can't wait! Got 3 in the mail on it's way!

HaRuMaN · « **Reply #2 on:** June 19, 2012, 03:20:52 pm »

Cue M$ banning these in an upcoming update in 3... 2... 1...

SNAAKE · « **Reply #3 on:** June 19, 2012, 03:21:23 pm »

I may be out of the loop but wtf is this again? p360 add on for sanwa sticks?

HaRuMaN · « **Reply #4 on:** June 19, 2012, 03:23:26 pm »

A pcb that works on 360 / PS3 / PC / PSX

SNAAKE · « **Reply #5 on:** June 19, 2012, 03:26:54 pm »

word? how much

looks sexy..plus I dont play on xbox live anyway might be a good use for me

HaRuMaN · « **Reply #6 on:** June 19, 2012, 03:55:18 pm »

Quote from: pinballjim on June 19, 2012, 03:51:01 pm

Quote from: HaRuMaN on June 19, 2012, 03:20:52 pm
Cue M$ banning these in an upcoming update in 3... 2... 1...

aka "Don't buy these, buy my hacked controllers - please!"

You done got made obsolete, Haruman.

Pretty much... aside from the occasional person who wants DC controllers hacked, things have been a bit slow.

On an unrelated note, I just hacked 2 NES, 2 SNES, 2 Genesis, and 2 TurboGraphx controllers for a guy out in Cali.

SNAAKE · « **Reply #7 on:** June 19, 2012, 04:03:47 pm »

yeah so how much and where do I order one?

I fine with converters but I wanna try one of these

HaRuMaN · « **Reply #8 on:** June 19, 2012, 04:06:43 pm »

No idea how much or how to get one... they were just pre-orders.

http://akishop-customs.com/index.html

opt2not · « **Reply #9 on:** June 19, 2012, 05:29:09 pm »

Quote from: pinballjim on June 19, 2012, 03:51:01 pm

Quote from: HaRuMaN on June 19, 2012, 03:20:52 pm
Cue M$ banning these in an upcoming update in 3... 2... 1...

aka "Don't buy these, buy my hacked controllers - please!"

You done got made obsolete, Haruman.

No worries Haruman, I'll still get DC and XBOX 1 hacks off you! Besides, you've got what, a year or 2 before the next consoles are out. I'm sure there will be an influx of hacking research for you then

Quote from: HaRuMaN on June 19, 2012, 04:06:43 pm

No idea how much or how to get one... they were just pre-orders.

http://akishop-customs.com/index.html

I got mine at canadianjoysticks, a local guy here in Vancouver. I'm not sure where else is importing them; I would have assumed that Focusattack would have done so, but it looks like they're not.

SNAAKE · « **Reply #10 on:** June 19, 2012, 05:34:22 pm »

there is no research lol..all pads are pretty much the same

surprised I didn't jump on the pad haxing business. but I am fairly busy with other things. maybe I will if/when there is demand for new console pads or whatever

anyway $50 for this thing is good imo. it has led options too. I am thinking about building a lexan case or something. or at least some kind of lighted artwork.

SNAAKE · « **Reply #11 on:** June 19, 2012, 06:25:13 pm »

well someone has to verify it works with dreamcast and xbox1 converter.

"universal" pcbs didn't work with converters before. like those madcatz universal sticks for ps2/xbox/gc never worked with dreamcast or pc/usb converters. jmike post your result if you have any converters.

also if you send me one of these I will gladly do those artworks for your cocktail cabinet

opt2not · « **Reply #12 on:** June 19, 2012, 06:37:17 pm »

I don't have a DC or XBOX1 converter adapter, but I do have a Gamecube one that I can test out. Worked like a charm before, so we'll see...

Quote from: SNAAKE on June 19, 2012, 05:34:22 pm

there is no research lol..all pads are pretty much the same

Well we'll see what the "new" controllers are like. I have this feeling that touch interfaces are not going to go away any-time soon... as much as I wished they did.

jmike · « **Reply #13 on:** June 20, 2012, 07:05:50 am »

Sorry guys, I don't have any converters to work with. These things are suppose to be compatible with just about everything. They'll even have a headset adapter. I got them from Focusattack.com. According to Jaleel they'll have a little over 100 PCBs left after the pre-orders are sent out.

I'll have to pass on the artwork exchange for one of these Snaake.

Malenko · « **Reply #14 on:** June 20, 2012, 10:03:02 am »

Quote from: pinballjim on June 19, 2012, 03:51:01 pm

Quote from: HaRuMaN on June 19, 2012, 03:20:52 pm
Cue M$ banning these in an upcoming update in 3... 2... 1...

aka "Don't buy these, buy my hacked controllers - please!"

You done got made obsolete, Haruman.

yeah you should just write up a guide on how to solder xbox360 controlers so we dont have to buy through your monopoly! oh wait.....

PBJ, you upset Haruman didn't pack your ---steaming pile of meadow muffin--- tight enough?

SNAAKE · « **Reply #15 on:** June 20, 2012, 06:33:54 pm »

Quote from: jmike on June 20, 2012, 07:05:50 am

I'll have to pass on the artwork exchange for one of these Snaake.

booo

I will email focusattack I guess

jmike · « **Reply #16 on:** June 21, 2012, 09:19:18 am »

Come on now, I did wait over 15 months for these things to arrive . (I probably won't use them for another month or so)

opt2not · « **Reply #17 on:** June 21, 2012, 01:44:49 pm »

Same here. I came close to canceling my order a few times, and resorting to the paewang boards. But I'm glad I didn't now that they're finally shipping!

I've got my Jamma box to upgrade, and an empty Qanba Q3 joystick case ready to throw these into.

jmike · « **Reply #18 on:** July 12, 2012, 07:24:00 am »

Just a quick update for anyone looking to purchase these PCBs. They'll be available again starting this Saturday (7/14) at focusattack.com, here the link

http://www.focusattack.com/akishop-ps360-multi-console-joystick-pcb/

Be aware they claim to have only 200 units available.

amendonz · « **Reply #19 on:** July 12, 2012, 04:53:42 pm »

Been rocking a couple of these bad boys for a few weeks, working great, should have come with its own usb cord imo

opt2not · « **Reply #20 on:** July 12, 2012, 05:27:23 pm »

Quote from: amendonz on July 12, 2012, 04:53:42 pm

Been rocking a couple of these bad boys for a few weeks, working great, should have come with its own usb cord imo

I don't mind really...I've stock piled enough of these USB cables over the years of buying electronics that I don't need anymore.

That and I ended up utilizing the alternate USB points on the board, soldered to a USB pass-through for my joystick and JAMMA BOX (also contains a UVC). I'm loving these boards!

Here's a pic of my joystick:

The black wire is the USB pass-through mount cable. Soldered a JST header to the board, easy-peasy.

jmike · « **Reply #21 on:** July 12, 2012, 08:58:03 pm »

Glad to hear they're working so well.

opt2not what kind of fight stick is that? What kind of art you got on there?

opt2not · « **Reply #22 on:** July 13, 2012, 02:55:27 am »

Quote from: jmike on July 12, 2012, 08:58:03 pm

Glad to hear they're working so well.

opt2not what kind of fight stick is that? What kind of art you got on there?

It's a Qanba Q3 case, got it for $60 and filled it with extra parts I had available.

All-wood construction, very nice finish, and very solid.
Got the stock art on currently, but I'm working on something that'll replace it.

jmike · « **Reply #23 on:** July 13, 2012, 10:42:01 am »

Thought about getting one of those Qanba sticks a while back, but the buttons seem really close to the joystick. How comfortable is it?

Generic Eric · « **Reply #24 on:** July 13, 2012, 12:13:20 pm »

So, could I run this through a kvm and have a mame pc and xbox 360 in the same cabinet?

opt2not · « **Reply #25 on:** July 13, 2012, 05:19:43 pm »

Quote from: jmike on July 13, 2012, 10:42:01 am

...but the buttons seem really close to the joystick. How comfortable is it?

The buttons and joystick is in the standard Sega layout used in Astro City's, Blast City's, etc. (except for the additional row of buttons at the end). But it's the same spacing as my Candy cabinet panels.
I find it comfortable myself, but those with bigger hands might not.

Quote from: Generic Eric on July 13, 2012, 12:13:20 pm

So, could I run this through a kvm and have a mame pc and xbox 360 in the same cabinet?

Yup.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news