Author Topic: [Completed] Street Fighter Arcade Cab -Previously "Girls of" (Read 19898 times)

tommywright · « **on:** September 19, 2011, 03:43:58 pm »

I've been trying to think of a theme for my new project and I keep coming back to this idea of "Girls of Street Fighter" or "Fighting Girls" cab with the graphics being themed on all the fighting game girlies.

I've made the decision to base the cab design on the Global Arcade Classics machine like a few others in here because I like the look of those and I want something smaller than my last (giant quad machine).

I ordered the monitor (Makvision 2929D-72) and got the computer humming nicely with groovymame and Hyperspin. Now I just have to build the cab.

I built it already in 3d and even mocked up some possible graphics just grabbing stuff off the web. I'm not completely sold on the graphics yet. Let me know what you guys think....

*EDIT: I renamed the Subject because I'm not doing "Girls of Street Fighter" but rather an overall Street Fighter inspired machine.

Rick · « **Reply #1 on:** September 19, 2011, 04:01:19 pm »

I like it - but don't Ken and Ryu need some surgery to meet the requirements?

Martijn · « **Reply #2 on:** September 19, 2011, 04:08:10 pm »

Nah, Chun-Li ken ryu are all sisters, some had to many steroids

Cabinet looks nice, good luck

Unstupid · « **Reply #3 on:** September 19, 2011, 04:55:21 pm »

Nice render... Like the raytracing! What software?

Donkbaca · « **Reply #4 on:** September 19, 2011, 04:56:50 pm »

Dudes with fetishes about cartoony asian women committing violence against themselves are creepy...

tommywright · « **Reply #5 on:** September 19, 2011, 05:42:36 pm »

How ironic, I find dudes that don't like cartoony asian women commiting violence to be creepy.

Yeah, obviously I just threw that marquee up there for it. I'm still not sold. I might do my own retro thing.. I was thinking about it over lunch.. maybe do space invaders but as rendered 3d particles (do like thousands of them flying up the cab side). Dunno yet. I thought the girls would be fun, colorful and light-hearted.. not creepy.

mmonden · « **Reply #6 on:** September 20, 2011, 04:51:56 pm »

Quote from: tommywright on September 19, 2011, 05:42:36 pm

How ironic, I find dudes that don't like cartoony asian women commiting violence to be creepy.

+1

SNAAKE · « **Reply #7 on:** September 20, 2011, 10:34:16 pm »

replace ryu+ken marquee with random SF girls??

nice render.

leapinlew · « **Reply #8 on:** September 21, 2011, 08:58:32 am »

needs more cleavage

Vigo · « **Reply #9 on:** September 21, 2011, 10:44:41 am »

More Chun Li.

Martijn · « **Reply #10 on:** September 21, 2011, 10:58:18 am »

Kasumi or Mai

gbeef · « **Reply #11 on:** September 21, 2011, 11:57:41 am »

Dump the guys in the marquee. I agree get some ladies in there especially if you calling the cab Girls of Street Fighter

mmonden · « **Reply #12 on:** September 21, 2011, 03:07:19 pm »

Quote from: gbeef on September 21, 2011, 11:57:41 am

Dump the guys in the marquee. I agree get some ladies in there especially if you calling the cab Girls of Street Fighter

He said above that he just threw the guys up there for the render....Did you really think he is going to have dudes on his girls of street fighter cabinet?

swaffar · « **Reply #13 on:** September 21, 2011, 05:55:26 pm »

I dig the art, but if I think you should at least make it more than just street fighter girls. You can't forget the Darkstalkers girls. But I totally know what you mean with the debate... I'm constantly daydreaming about another project and I'd be torn between a rendition of something already existing or something original that looks like it could have been a real arcade. I always loved the crystal castles art.

tommywright · « **Reply #14 on:** September 25, 2011, 10:56:45 pm »

It has begun.

I cut the 2 sides out today but they need a lot of sanding to get them even. I still haven't decided on the graphics. I need to do some renders and see if something catches my fancy... otherwise it's going to be fighting chicks.

Hey Martijn... your Street Fighter build is what inspired mine!

Martijn · « **Reply #15 on:** September 27, 2011, 05:55:51 am »

Quote from: tommywright on September 25, 2011, 10:56:45 pm

Hey Martijn... your Street Fighter build is what inspired mine!

Yeah i noticed a resemblance. Makvision 2929D-72 is a 29 Inch? Nice size

Paint or laminate?

Good luck

tommywright · « **Reply #16 on:** September 27, 2011, 11:58:22 am »

I think I'm going to follow yours and do laminate. That has such a finished look to it. Besides, I painted my last one and i want to do something different.

The rounded cabinet has been quiet a bit more difficult than the straight edge one. It's more work but I'm not as crazy anxious to get it done like I was last time so I'm enjoying the build itself.

I'm looking for a router bit that can cut my t-molding groove now. This is going to be another challenge with the rounded edge.. how to cut a consistent groove.

Yvan256 · « **Reply #17 on:** September 27, 2011, 12:05:23 pm »

Quote from: tommywright on September 27, 2011, 11:58:22 am

I'm looking for a router bit that can cut my t-molding groove now. This is going to be another challenge with the rounded edge.. how to cut a consistent groove.

Don't worry about it. Just go slowly and it won't be any more trouble than a straight edge.

Green Giant · « **Reply #18 on:** September 27, 2011, 12:43:21 pm »

Quote from: mmonden on September 21, 2011, 03:07:19 pm

Quote from: gbeef on September 21, 2011, 11:57:41 am
Dump the guys in the marquee. I agree get some ladies in there especially if you calling the cab Girls of Street Fighter

He said above that he just threw the guys up there for the render....Did you really think he is going to have dudes on his girls of street fighter cabinet?

I think he is going to have dudes all over his girls of street fighter.

jayska01 · « **Reply #19 on:** September 27, 2011, 08:51:24 pm »

Snk one side and Capcom on the other habba habba!!

tommywright · « **Reply #20 on:** October 03, 2011, 01:17:01 am »

Would there be any reason to laminate the sides that are going to have printed graphics? Wouldn't you just be covering the laminate?

SNAAKE · « **Reply #21 on:** October 03, 2011, 12:48:49 pm »

Quote from: tommywright on October 03, 2011, 01:17:01 am

Would there be any reason to laminate the sides that are going to have printed graphics? Wouldn't you just be covering the laminate?

I always wondered about that

Martijn · « **Reply #22 on:** October 03, 2011, 03:50:43 pm »

well when i laminate the side it gives a smooth surface, any wood imperfections of gapes are gone. its a strong surface like a kitchen table, that gives a professional feel when you touch the artwork and surface , also easy to pull back the art and reapply.

tommywright · « **Reply #23 on:** October 03, 2011, 04:39:30 pm »

I might have screwed myself for laminate. I'm building with 3/4" MDF so if I add a laminate, will my t-molding not cover the edges... or do they make a larger t-molding for this event?

Martijn · « **Reply #24 on:** October 04, 2011, 04:17:24 am »

well mdf here is 18mm and tmolding is 19mm with the laminate is perfect flush. artwork is so thin it wont be a problem

Unstupid · « **Reply #25 on:** October 04, 2011, 02:28:49 pm »

If it is not wide enough you could always order 13/16" or even 1" t-molding from these guys: http://www.t-molding.com. Then if it is to wide you could get a quad trimmer from fastcap to trim off whatever is overhanging like so:

tommywright · « **Reply #26 on:** October 04, 2011, 02:50:26 pm »

Great! Thanks for the video. That didn't look hard at all.

eds1275 · « **Reply #27 on:** October 04, 2011, 03:34:34 pm »

Quote from: Unstupid on October 04, 2011, 02:28:49 pm

If it is not wide enough you could always order 13/16" or even 1" t-molding from these guys: http://www.t-molding.com. Then if it is to wide you could get a quad trimmer from fastcap

That is neat! I'd just love to see it do a corner though...

eds1275 · « **Reply #28 on:** October 04, 2011, 03:36:50 pm »

I just asked them to make a video showing corner cutting and a close up of the trimmed t-molding, let's hope they deliver!

tommywright · « **Reply #29 on:** October 04, 2011, 04:07:50 pm »

An obvious way would be to set it on a straight area, cut it, then place it in the corner (at least it sounds like that would work).

Unstupid · « **Reply #30 on:** October 04, 2011, 05:09:34 pm »

I have one of these quad trimmers. I was going to use it to trim the 3/4" tmolding off of my 3/4" plywood. I'll try and take some pictures of some test cuts this evening.

eds1275 · « **Reply #31 on:** October 04, 2011, 05:31:34 pm »

Quote from: tommywright on October 04, 2011, 04:07:50 pm

An obvious way would be to set it on a straight area, cut it, then place it in the corner (at least it sounds like that would work).

Well yeah that would work I suppose, but I meant more for things like a curve - both inside and outside curves might be too much for this tool.

fallacy · « **Reply #32 on:** October 10, 2011, 05:08:49 pm »

Quote

needs more cleavage

tommywright · « **Reply #33 on:** October 10, 2011, 05:20:07 pm »

I'm building this one around the monitor so everything it test fit against the bezel here. I've got the t-mold routed in and the support pieces on.

tommywright · « **Reply #34 on:** October 10, 2011, 05:25:15 pm »

I've also placed the monitor mount brackets in (2x4s) and placed the monitor on to test fit. Do you guys think I need more support for this heavy monitor? I could build more of a frame inside but is that necessary?

wp34 · « **Reply #35 on:** October 10, 2011, 09:32:30 pm »

Quote from: Unstupid on October 04, 2011, 02:28:49 pm

If it is not wide enough you could always order 13/16" or even 1" t-molding from these guys: http://www.t-molding.com. Then if it is to wide you could get a quad trimmer from fastcap to trim off whatever is overhanging like so:

Thanks for posting that.

In my tests with 5/8 plywood there is a bit of a gap after laminating. That quad trimmer might be just the ticket.

tommywright · « **Reply #36 on:** November 19, 2011, 03:29:11 pm »

Assembled the body and painted. I decided to hand off the controller work to Dream Home Arcades to complete... I'm just too lazy and they are suppose to be the best so I'm sure they'll do way better than I would have.

I'll have the graphics this week. I'm printing them at my family's print shop. I want to give them a plug here. The place is called Carolina Canvas www.carolinacanvas.com and they are great (and cheap). They specialise in large format printing. Mine will be printed on a thin, self adhesive vinyl that is UV protected so it should last forever.

Here's the cab so far...

tommywright · « **Reply #37 on:** November 20, 2011, 10:48:11 pm »

Haha! I think that's one of my cousins.

SNAAKE · « **Reply #38 on:** November 21, 2011, 06:10:26 pm »

that girl isnt too sure either lol

RonnieC312 · « **Reply #39 on:** November 22, 2011, 10:13:36 am »

Quote from: tommywright on November 20, 2011, 10:48:11 pm

Haha! I think that's one of my cousins.

LOL

Did someone post a pic of themself with a girl HAHAHAHAHAHAHAH


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news