Author Topic: Completed JUKEBOXES - Converted from old Vintage Radio's (Read 2633 times)

Bobby115 · « **on:** June 12, 2011, 08:41:17 pm »

Hey Everyone,

Here are a few complete projects I created from Old Vintage Radio's

Insides contain - 15IN Elo touchscreen - PC - Speaker System - Software (Album Player)

Thoughts .........

DaOld Man · « **Reply #1 on:** June 12, 2011, 08:46:21 pm »

Good job! However that third pic dont look much like an old radio.

Bobby115 · « **Reply #2 on:** June 12, 2011, 09:03:41 pm »

How did that get in there :-) LOL

Thanks

drventure · « **Reply #3 on:** June 12, 2011, 11:42:27 pm »

Nice work! I've been scouring CL for a decent buy on an old (as in 1920's, early 30's vintage) radio that doesn't actually work, (I'd hate to destroy a working model).

Found one that was close, but they wanted 250$. Granted, probably couldn't get the wood needed to build it for that, but still....

Anyway, very nice builds!

mgb · « **Reply #4 on:** June 13, 2011, 09:19:46 am »

Very nice work. I love the mix of classic style with newer technology.
Very well done

gbeef · « **Reply #5 on:** June 13, 2011, 11:51:20 am »

really nice finishing

yotsuya · « **Reply #6 on:** June 13, 2011, 12:09:32 pm »

Nice job. The last one is my favorite. I like how the screen is part of the shape of the radio rather than protruding out the top.

Meph · « **Reply #7 on:** June 15, 2011, 12:24:23 pm »

I love all of them. I just finished my first juke which was converting a late 80s Rowe Juke. My wife hates it and has asked me to do a vintage radio conversion instead. I picked up this Philco today for free and was wondering if you had any tips to share with refinishing the wood. I have never done a wood refinishing job like this and don't really care to just start sanding away if I might really mess something up. Any info you want to share would be wonderful.

ChadTower · « **Reply #8 on:** June 15, 2011, 03:16:12 pm »

That doesn't need refinishing. I bet that will clean up pretty nicely the way it is. Worst it might need is a little bit of touchup near the bottom but honestly I'd say clean it up, wax/polish it, and leave it be.

Donkbaca · « **Reply #9 on:** June 15, 2011, 03:25:06 pm »

yeah, I would oil it. I would love to do a project like this someday


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Completed JUKEBOXES - Converted from old Vintage Radio's (Read 2633 times)

Bobby115

Completed JUKEBOXES - Converted from old Vintage Radio's

DaOld Man

Re: Completed JUKEBOXES - Converted from old Vintage Radio's

Bobby115

Re: Completed JUKEBOXES - Converted from old Vintage Radio's

drventure

Re: Completed JUKEBOXES - Converted from old Vintage Radio's

mgb

Re: Completed JUKEBOXES - Converted from old Vintage Radio's

gbeef

Re: Completed JUKEBOXES - Converted from old Vintage Radio's

yotsuya

Re: Completed JUKEBOXES - Converted from old Vintage Radio's

Meph

Re: Completed JUKEBOXES - Converted from old Vintage Radio's

ChadTower

Re: Completed JUKEBOXES - Converted from old Vintage Radio's

Donkbaca

Re: Completed JUKEBOXES - Converted from old Vintage Radio's