Author Topic: Attack of the PINZ (Read 13238 times)

gbeef · « **on:** April 26, 2011, 06:48:22 pm »

Hey everyone thought id share my pinball build.

Heres my setup for computer.

i5 760 OC/3.5Hz
MSI P55
64G SSD
4 Gigs kingston ram
2X GTX260's
750W coolmaster

42" LG 450
32" Dynex
19" Benq

Im really excited now i waiting on my bar and will be placing an order soon with Pinball life. I dont have a name for the pin but i think want want the artwork too look like an original cab.

Topper shots

Heres the full machine

Heres the header

Heres an overview

borals · « **Reply #1 on:** April 26, 2011, 07:15:20 pm »

Holy ---steaming pile of meadow muffin--- that is amazing!

Damn that is a professional build, looks awesome man, getting some use out of it?

amendonz · « **Reply #2 on:** April 26, 2011, 07:22:40 pm »

AWESOME!!

got a video of it all up and running?? would love to see it in action

Donkbaca · « **Reply #3 on:** April 26, 2011, 07:34:54 pm »

You know something is great when I f-ing hate you for it.

I f-ing hate you

gbeef · « **Reply #4 on:** April 26, 2011, 08:04:10 pm »

Quote from: amendonz on April 26, 2011, 07:22:40 pm

AWESOME!!

got a video of it all up and running?? would love to see it in action

I have video on youtube but i can figure out whats the tagging to embed it.
Anyone?

Bender · « **Reply #5 on:** April 26, 2011, 08:27:04 pm »

just past the link, it does it automatically

My, My, that is beautiful!
Fantastic job on the retro Art!!!!!!!!

gbeef · « **Reply #6 on:** April 26, 2011, 08:34:49 pm »

Thanks, video is uploaded in the first post.

Erik · « **Reply #7 on:** April 26, 2011, 10:37:34 pm »

rockin the pingulp!

markronz · « **Reply #8 on:** April 26, 2011, 10:45:57 pm »

Quote from: Donkbaca on April 26, 2011, 07:34:54 pm

You know something is great when I f-ing hate you for it.

I f-ing hate you

My thoughts exactly.

emphatic · « **Reply #9 on:** April 27, 2011, 04:03:51 am »

Great work!

javeryh · « **Reply #10 on:** April 27, 2011, 09:33:45 am »

Wow dude. SICK. Looks like it came straight out of the factory.

Corbo · « **Reply #11 on:** April 27, 2011, 09:34:19 am »

Awesome looking build! Great work.

BobA · « **Reply #12 on:** April 27, 2011, 09:40:52 am »

Wow great looking pinball cab. Looks completely professional if not better

Serious PC power to run the cab

Necro · « **Reply #13 on:** April 27, 2011, 11:04:18 am »

Love it. Want one. Need to finish arcade cab first.

melvinbates · « **Reply #14 on:** April 27, 2011, 05:08:44 pm »

WOW. That is absolutely incredible. Great Work.

javeryh · « **Reply #15 on:** April 29, 2011, 06:00:18 pm »

Got any more pics of the building process? I'd love to see the details.

What about a quick summary? How long did it take? What was the most challenging part? How expensive was it? Etc.

gbeef · « **Reply #16 on:** April 30, 2011, 05:42:03 pm »

Quote from: javeryh on April 29, 2011, 06:00:18 pm

Got any more pics of the building process? I'd love to see the details.

What about a quick summary? How long did it take? What was the most challenging part? How expensive was it? Etc.

Sorry i dont have anymore pics.
also these machines arent cheap to build
quick break down off the top of my head.

3XLCD's 1000.00
Pinball parts 700.00
ipac 60
LEDWIZ 60
Wood 80
Glass 100
Artwork 150.00
Odds and ends 100
Contractors 360.00
LED's 100.00
PC 1000.00
speakers 120.00

You looking at about 3K to build one of these and a TONNNN of time. but it totally worth it. You can probably build a cheap setup for about 2K. If you also went an bought a dead cabinet with all the parts it you would save about 1K off the bat.

RandyT · « **Reply #17 on:** April 30, 2011, 07:07:20 pm »

Absolutely fantastic. But I think what impresses me the most is that you were able to finish it after you had a playable mock-up. Be honest, how much was the time to make it increased, due to play-testing between steps?

I agree with javeryh, looks like a factory job. Great artwork too!

gbeef · « **Reply #18 on:** April 30, 2011, 09:44:09 pm »

Quote from: RandyT on April 30, 2011, 07:07:20 pm

Absolutely fantastic. But I think what impresses me the most is that you were able to finish it after you had a playable mock-up. Be honest, how much was the time to make it increased, due to play-testing between steps?

I agree with javeryh, looks like a factory job. Great artwork too!

It wasn't too bad. The big thing that takes time is wiring the thing, building a machine like this take X2 more effort than a MAME. And yes i played alot of staging. haha. What kept me going was the space staging took too much room in my main room.. also the lights at the top and the force feedback in the machine push you to finish. BTW the LEDWIZ has brought alot to the table in the realm of Virtual pinball, Im sure you've seen and increase in your sales on the board in the last 2 months.

I would say this project took me 4 months to build from start to finish. Thats if you build from scratch.

RandyT · « **Reply #19 on:** May 03, 2011, 12:04:48 am »

Quote from: gbeef on April 30, 2011, 09:44:09 pm

BTW the LEDWIZ has brought alot to the table in the realm of Virtual pinball, Im sure you've seen and increase in your sales on the board in the last 2 months.

Thanks. I've seen some pretty amazing things being done with them in that application. There are some really talented people out there taking advantage of it's functionality, and it does help keep the demand steady.

Again, great job. BTW, I'm not sure if you have leaf buttons in there for the flippers, but I highly recommend some. I built a makeshift panel so I could play PinballFX2, and used a couple of our transparent red CLASSX buttons for the flippers, with the True-Leaf Pro switches, and it makes a huge difference in playability. If you don't have leaf switches, definitely give them a try.

Harakiri · « **Reply #20 on:** May 03, 2011, 03:55:22 am »

Apart from the "Bally" lettering and the speakers grill that don't look authentic this is the most awesome VP cabinet i've ever seen. Congratulations!

*

* I hate you...

Donkbaca · « **Reply #21 on:** May 03, 2011, 12:24:12 pm »

what was the 360 for contractors for?

Erik · « **Reply #22 on:** May 03, 2011, 08:52:49 pm »

Quote from: Donkbaca on May 03, 2011, 12:24:12 pm

what was the 360 for contractors for?

I think he meant contactors. They're noisy relays and used to give a better approximation of flipper feedback than you'd get with just software

gbeef · « **Reply #23 on:** May 03, 2011, 10:33:05 pm »

Quote from: Harakiri on May 03, 2011, 03:55:22 am

Apart from the "Bally" lettering and the speakers grill that don't look authentic this is the most awesome VP cabinet i've ever seen. Congratulations! *
* I hate you...

Thanks i think.. i down the road ill probably swap it out i need to find someone with an ultra sonic water machine.

Quote from: Erik on May 03, 2011, 08:52:49 pm

Quote from: Donkbaca on May 03, 2011, 12:24:12 pm
what was the 360 for contractors for?
I think he meant contactors. They're noisy relays and used to give a better approximation of flipper feedback than you'd get with just software

I've installed force feed back into the machine theres solenoids that knock the side of the cabinet. There place all over inside, they suppose to simulated knocking like a real cab.

homertv · « **Reply #24 on:** May 04, 2011, 02:47:26 pm »

I love those LED's, where did you get them?

Thanks!

gbeef · « **Reply #25 on:** May 04, 2011, 04:03:02 pm »

I got them from LEDsupply.com there high powered you can have them in a saltwater fish tank.

Santoro · « **Reply #26 on:** May 15, 2011, 12:33:27 am »

Excellent job!

drventure · « **Reply #27 on:** May 16, 2011, 10:59:07 pm »

Fantastic job on this. Can't believe I haven't seen it earlier.

Firebat138 · « **Reply #28 on:** May 17, 2011, 12:53:03 am »

been following this for a while over at HS I think... or Vp... But fantastic build

Malenko · « **Reply #29 on:** May 20, 2011, 10:11:06 am »

Amazing. first thing I noticed was the Killer Instinct 2 CPO on the KI1 machine. Which game is in there? MAME?

back to the point of this, love the build. Im not sure if this one or Chris' build is better but they are both equally amazing.

Jasonmm · « **Reply #30 on:** May 20, 2011, 10:23:09 am »

I love this build ... Jason

Malenko · « **Reply #31 on:** May 20, 2011, 10:31:59 am »

its bad form to photobomb someone elses project thread, especially one as nice as this.

Jasonmm · « **Reply #32 on:** May 20, 2011, 10:35:24 am »

Quote from: Malenko on May 20, 2011, 10:31:59 am

its bad form to photobomb someone elses project thread, especially one as nice as this.

Yup I know , I just had to much coffee ... IAG

Jason

extendedplayarcade · « **Reply #33 on:** May 20, 2011, 10:49:56 am »

That is some serious talent!

I wish I had the room and the money and half the talent!

gbeef · « **Reply #34 on:** May 20, 2011, 02:21:16 pm »

Quote from: Malenko on May 20, 2011, 10:11:06 am

Amazing. first thing I noticed was the Killer Instinct 2 CPO on the KI1 machine. Which game is in there? MAME?

back to the point of this, love the build. Im not sure if this one or Chris' build is better but they are both equally amazing.

Thanks for the compliments guys!

Its a KI Mame, i bought just dead empty cab cleaned all the mouse crap out of it and converted it. There's a 27" TV in it, I tossed an i3 into it. I'm planning on redoing the whole CP someday to support 4 players but make it module so i can add 2 additional players. Because i move the cabinet in and out of the room and stick into a dooway when company comes over it saves a ton of space. lol..

Ill be start my racing cabinet this weekend i got a new seat! woot!

Jasonmm · « **Reply #35 on:** May 20, 2011, 05:41:02 pm »

Hi

I got questions for you ....

If you had it to do all over again , would you use a 46in playfield ?

Are you happy with your 42in ?

Would you do anything else different ?

How does it size up to that adams family ? I mean it looks awesome ofcourse , but does it look like a 'real' pin cab from across the room ?

I am about to build one , and can't figure out if I want to spend the extra $400 for the 46in.

Thanks

Jason

Ofcourse its awesome ... !!!!

PS. Do you have saltwater fish ?

Jasonmm · « **Reply #36 on:** May 20, 2011, 06:14:19 pm »

HI

I got another question for you ...

Do you think all LCD TV look like this after you remove the bezil ?

I know you have no way of knowing for sure ... Just asking you to take your best guess ...

thanks Jason

gbeef · « **Reply #37 on:** May 20, 2011, 06:29:19 pm »

Quote from: Jasonmm on May 20, 2011, 05:41:02 pm

Hi

I got questions for you ....

If you had it to do all over again , would you use a 46in playfield ?

Are you happy with your 42in ?

Would you do anything else different ?

How does it size up to that adams family ? I mean it looks awesome ofcourse , but does it look like a 'real' pin cab from across the room ?

I am about to build one , and can't figure out if I want to spend the extra $400 for the 46in.

Thanks

Jason

Ofcourse its awesome ... !!!!

PS. Do you have saltwater fish ?

To answer your first question, Nothing will replace the real thing in regards to pinball. But VP is pretty Dang close. With the recent improvements of adding force feed back and topper lighting VP is at a new level. VP has been only been around for maybe 2 years (that's the full size table stuff) and it keeps getting better. Table authors are pushing the limits in details, to replicate the real thing the best they can.

It all depends on the authors of the tables also in term of quality Jpsales has produced a ton of tables that are really close to the real thing.

In terms of realism i sold my original Addams family, Indiana Jones, Twilight zone. Why? because i hate maintenance, and VP is AWESOME. Real pinball's break like cars (and can cost the same to repair) and pinballs aren't getting any younger. Therefore as time goes on more stuff will break and yes it looks like a real pin across the room Ive had company say they can't believe there playing a machine, it feels and looks real, It actually throws them off. Space is also an issue i wanted a driving cabinet also.

Monitors
There's 2 factors to consider, Cost and BALL SIZE.
i went with a 42 because it was cheaper, but because i felt a 46" ball size would be too big! and the flippers would be massive. I wanted something to scale. I guess it's all personal choice.

Do different?
I would consider 46" LCD maybe. I would need to run some tests..
Smaller LCD try and 30" back glass, there hard to find. I know you can find 28"

Suggestion's
Don't cheap out on parts on the cab if your going to spend the money budget for 2.5-3K at least and force feed back and lights make a big difference

and
Yes i do have Saltwater fish

Jasonmm · « **Reply #38 on:** May 20, 2011, 06:43:48 pm »

Hey right on ...

Thanks for the answers ...

I guess its 42in for me too then ...

I am sooo excited ...

I seen you were in Canada , Ont. by any chance ?

I used to breed clownfish , I posted a few (to many) pics this morning , but someone didnt like it ....

I love your driving car cab ...

thanks Jason

If you think of anything thing else you would do differently ... or want me to try ... please pm me ...

okay heres one ... lol

http://i234.photobucket.com/albums/ee35/Jasonmm92/Batch_of_ocellaris.jpg

Malenko · « **Reply #39 on:** May 20, 2011, 08:52:19 pm »

just so you know, and NBA Jam 4 player CP will bolt right up to that cab.

Back to the pincab, have any pix of the inside or wiring?


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news