Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: how much room do I need to leave underneath P1 and P2 controls for a trackball  (Read 2093 times)

0 Members and 1 Guest are viewing this topic.

Psicosis

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • Last login:December 24, 2014, 11:10:12 pm
how much room do I need to leave underneath P1 and P2 controls for a trackball
« on: October 28, 2010, 03:57:12 pm »
I am getting ready to build my control panel and It will be a 4 player unit.  I will be installing a trackball further down the road. I am wondering how much room I need to leave underneath the control panel between P1 and P2 controls to be able to mount the trackball later.
Logged

dfmaverick

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 343
  • Last login:July 03, 2016, 11:17:27 am
  • I want to build my own arcade controls!
Re: how much room do I need to leave underneath P1 and P2 controls for a trackball
« Reply #1 on: October 28, 2010, 05:26:08 pm »
Probably depends upon your trackball and if you are using a mounting plate.

(ie) Happ 3" mounting plate is 6.5" wide.

http://www.happcontrols.com/trackballs/55110100m.htm
Logged

Psicosis

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • Last login:December 24, 2014, 11:10:12 pm
Re: how much room do I need to leave underneath P1 and P2 controls for a trackball
« Reply #2 on: October 28, 2010, 09:54:36 pm »
yea I was thinking about going with that ultimarc U-Trak. there is a picture of some dimensions of it but I dont know what way it is supposed to go and it doesnt show the measurement of one if the sides
Logged

BobtheAddict

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 63
  • Last login:October 29, 2010, 12:00:22 am
  • Icy Cold Beverages
Re: how much room do I need to leave underneath P1 and P2 controls for a trackball
« Reply #3 on: October 28, 2010, 11:44:01 pm »
I have a 3" Happs Trackball for my cabinet and my Control panel is currently 4" deep which has plenty of room. I would keep the depth to a minimun of 3.5" so that you have enough room underneath for your keyboard encoder and wires.

 :afro:
Logged
BobTheAddict

dfmaverick

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 343
  • Last login:July 03, 2016, 11:17:27 am
  • I want to build my own arcade controls!
Re: how much room do I need to leave underneath P1 and P2 controls for a trackball
« Reply #4 on: October 29, 2010, 03:41:37 am »
The U-Trak looks to have a footprint of 145mm x 145mm. (Approx 5.71" x 5.71").
Logged
Pages: [1]
  
Go Up
« previous next »