Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Monitor repair/calibration problem?  (Read 963 times)

0 Members and 1 Guest are viewing this topic.

Grec

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 21
  • Last login:May 07, 2013, 02:24:56 pm
Monitor repair/calibration problem?
« on: September 07, 2010, 03:37:21 pm »
Hey guys,
I recently moved, and of course moved my Tetris cab with me. Before I moved it worked perfectly. Before I moved, I removed the monitor from the cabinet so it wouldn't bang around inside the cabinet. When I finally got everything setup at my new place. I reinstalled the monitor, but now my monitor looks like this. I'm tried calibrating it with the knobs on the back, but can't seem to get a anything legible to show up on the screen. Am I just not trying hard enough? Or do I have a bigger problem on my hands?
Logged

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 16, 2025, 06:33:55 pm
Re: Monitor repair/calibration problem?
« Reply #1 on: September 07, 2010, 06:11:02 pm »
looks like you have lost sync or video ground

you would need to run continuity tests using a multimeter on both those signal lines-maybe you even left a plug off when you reinstalled the monitor
Logged
Pages: [1]
  
Go Up
« previous next »