I know the thread hasn't moved for a while, but I haven't actually stopped working on this. I figured me fettling a couple of mm off a piece of MDF, or painting the cab interior wouldn't be of much interest so I didn't bother to post. I offered up the CP for a trial fitting and thought I'd post a pic.
The eagle-eyed amongst you will notice that in the earlier photo the stainless didn't have a protective film, but now it has. That's because it's a different panel. Turns out I had given the wrong dimensions to my father by about 3mm on the height, so it just wouldn't sit right.
In the end I decided to scrap it and had a new one made up. First mistake I have made thus far. Just a shame it had to be such a bloody expensive one.
![Cry! :cry:](http://newforum.arcadecontrols.com/Smileys/default/bawling.gif)
My Minipac arrived from Ultimarc the other day, as did the remaining buttons. Just need to finish the black paint interior, laminate the sides, wire it up and start thinking about a marquee, side art and a CPO (yes I am covering up the stainless.)