I am restoring a Donkey Kong cabinet. I have a two-board set that I have fired up, but the video is really crappy. Lots of vertical smearing. I thought possibly it was the horizontal adjustment pot on the video board, but shorting a 10K ohm resistor across the legs didn't fix the problem. I made a short video of the monitor that shows the problem.
Here is the video link:
http://www.rashphoto.com/DK/MOV00412.MPGIf it won't open automatically in Windows Media Player, you can right-click on the link and choose: SAVE TARGET AS to put in on your hard drive so that you can play it back.
I would really appreciate it if you guys could take a look and point me in the right direction.
Thanks,
Mark