Author Topic: JVL Encore no boot one long beep repeats (Read 2371 times)

northe · « **on:** April 29, 2020, 01:56:25 pm »

Greetings!
I have a JVL Encore that was a working unit. The customer called and said that it wouldn't start Up. In my shop it starts the fan but has no video. It repeats one long beep. The I/O card does not have burned surface fuses like my other one. There are red lights on the I/O board.
I tried finding the BIOS beep codes for it and had no luck. Not really sure where to start. The battery on the I/O card is close to 3v. Is there a BIOS battery on the main board too?
Any help is greatly appreciated. Thanks!

mahkeymike · « **Reply #1 on:** April 29, 2020, 04:04:26 pm »

I had a Encore that did that as well. It ended up being bad ram.

northe · « **Reply #2 on:** April 29, 2020, 09:39:27 pm »

I will look into that. Thank you!!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: JVL Encore no boot one long beep repeats (Read 2371 times)

northe

JVL Encore no boot one long beep repeats

mahkeymike

Re: JVL Encore no boot one long beep repeats

northe

Re: JVL Encore no boot one long beep repeats