Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Looking for help with my Gauntlet Dark Legacy  (Read 1449 times)

0 Members and 1 Guest are viewing this topic.

Red_aa

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:January 31, 2010, 11:30:31 am
Looking for help with my Gauntlet Dark Legacy
« on: January 27, 2010, 07:21:37 pm »
Hi everyone,
   I'm a newbie here and to the arcade world.  So here's what I did I moved my Dark legacy game to the other side of my basement.   On the way I hit one of the dogs toys and it slammed down on the floor(on the bottom not the back).  When I powered it back up it had no picture.  I checked all the plugs and the fuse on the monitor board (WG k7500).   I also checked the voltage out of the power supply. They were all good.  I installed a Gauntlet Dark Legacy v.2.52 Upgrade Kit  which included the security chip, boot eprom, and Harddrive.  It will not dark play and makes no sound.   All the boards light up.  Can anyone give me an idea of what I broke or where to look at next.
Logged

Red_aa

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:January 31, 2010, 11:30:31 am
Re: Looking for help with my Gauntlet Dark Legacy
« Reply #1 on: January 31, 2010, 03:32:30 am »
bump
Logged

DashRendar

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 488
  • Last login:November 06, 2015, 05:46:52 pm
  • "Don't get your servos in a twist pal."
Re: Looking for help with my Gauntlet Dark Legacy
« Reply #2 on: January 31, 2010, 11:35:42 am »
Sounds like maybe the JAMMA harness came disconnected?
Logged
WANTED: Somebody to go back in time with me. This is not a joke. P.O. Box 322, Oakview, CA 93022. You'll get paid after we get back. Must bring your own weapons. Safety not guaranteed. I have only done this once before.
Pages: [1]
  
Go Up
« previous next »