Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: 19 in wells no vertical deflection...IC3 Blown-up  (Read 1245 times)

0 Members and 1 Guest are viewing this topic.

ZMB

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 15
  • Last login:May 14, 2010, 07:46:29 pm
19 in wells no vertical deflection...IC3 Blown-up
« on: January 05, 2010, 03:25:04 pm »
Well, IC3 (upc1488h) took a dump and decided to explode on me. I don't have any more on any other chassis boards or on-hand in any other capacity. I do have a bunch of boards that us the pc1378h IC's but I can't find if they cross to each other...Does anyone know if it is safe to use a pc1378h instead of the upc1488h?

cheers,
ZMB

qrz

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1056
  • Last login:October 24, 2015, 03:04:15 pm
  • wrangling electrons since 1978
Re: 19 in wells no vertical deflection...IC3 Blown-up
« Reply #1 on: January 07, 2010, 10:58:10 am »
usually best to stay with orig numbers as much as possible.

looking at the pinouts , they do match with modification. so, it may work in a pinch .
pin 1 and 9 are not used on the upc1488h   Vcc 26v
upc1378  Vcc 24v    start pin 1 in the hole of orig IC
la7831 can sub the upc1378  cut pins 1,2 and 9

the 2 volt ratings difference might be a problem for long term use..... ?


be sure to check Vcc supply. may also have open fused resistor/shorted diode