Author Topic: 19 in wells no vertical deflection...IC3 Blown-up (Read 1582 times)

ZMB · « **on:** January 05, 2010, 03:25:04 pm »

Well, IC3 (upc1488h) took a dump and decided to explode on me. I don't have any more on any other chassis boards or on-hand in any other capacity. I do have a bunch of boards that us the pc1378h IC's but I can't find if they cross to each other...Does anyone know if it is safe to use a pc1378h instead of the upc1488h?

cheers,
ZMB

qrz · « **Reply #1 on:** January 07, 2010, 10:58:10 am »

usually best to stay with orig numbers as much as possible.

looking at the pinouts , they do match with modification. so, it may work in a pinch .
pin 1 and 9 are not used on the upc1488h Vcc 26v
upc1378 Vcc 24v start pin 1 in the hole of orig IC
la7831 can sub the upc1378 cut pins 1,2 and 9

the 2 volt ratings difference might be a problem for long term use..... ?

be sure to check Vcc supply. may also have open fused resistor/shorted diode


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: 19 in wells no vertical deflection...IC3 Blown-up (Read 1582 times)

ZMB

19 in wells no vertical deflection...IC3 Blown-up

qrz

Re: 19 in wells no vertical deflection...IC3 Blown-up