Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Installing rowe preamp board-60792702  (Read 3544 times)

0 Members and 1 Guest are viewing this topic.

brentlucas22

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:December 20, 2009, 06:56:56 pm
Installing rowe preamp board-60792702
« on: December 20, 2009, 06:56:56 pm »
I have a rowe cd-100 and want the audio from my tv to play through the juke. I have a pre-amp accessory board, but haven't installed one before. I have the audio wire and the rca barrels to solder on , but not quite sure which inputs they go to.Also there is a 5 pin molex,11 pin molex, and another 5 molex that is keyed to a 4 pin molex. Never hooked one up before so I appreciate any advice I can get on installing this board . Thanks !!!!!!!!!!
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Installing rowe preamp board-60792702
« Reply #1 on: December 20, 2009, 10:45:13 pm »
Logged
Pages: [1]
  
Go Up
« previous next »