Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Strange OptiPAC Problem--Help!  (Read 806 times)

0 Members and 1 Guest are viewing this topic.

personacom

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:September 15, 2003, 10:52:06 am
Strange OptiPAC Problem--Help!
« on: July 22, 2003, 09:50:13 am »
I have been lurking around these boards learning so much from you folks.  Thank you for this resource.

Here is my problem.  I have a Happ 3" trackball that I hooked to the USB Optipac per the instructions.  I have the jumper set to A/Lo and USB.

When I plug the Optipac into the PC, it comes up as an Unknown Device and I get a message indicating that a "USB device has malfunctioned and is not recognized by Windows".  In Device Manager I can see that no driver is installed.

I have rechecked my wiring twice, the jumpers appear to be in the right place, and I have the cable plugged into the Player One/USB port.

Incidentally, I plugged my Tornado spinner in (direct to PC via USB) and Windows recognized it as a single axis mouse immediately.

Any suggestions?  I am on Win XP Pro.

Ray

personacom

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:September 15, 2003, 10:52:06 am
Re:Strange OptiPAC Problem--Help!
« Reply #1 on: July 22, 2003, 05:41:41 pm »
I stumped ya all!   ???  Totally shocked!  :-)  For what it is worth, Andy hasn't been able to help either...yet.

Any suggestions you may have (I have already uninstalled and reconnected) would be great.

Thanks!

Ray