Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Control templates!  (Read 1766 times)

0 Members and 1 Guest are viewing this topic.

ffingers

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 60
  • Last login:February 19, 2020, 10:57:01 am
Control templates!
« on: November 05, 2009, 06:17:34 pm »
Don't know if this is in the right section, but I swear I saw once a place that had template files for standard controllers. That is, files that were done with the correct dimensions for the mounting plates and button holes?

If not that, what are the dimensions for standard buttons (hole, and diameter with cap)....the hole width for a joystick, spinner, trackball plate etc...

ugh...please help!

thanks guys!
Logged
Flynn's Arcade - it's HERE! Build and writeup!

DillonFoulds

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 605
  • Last login:August 27, 2019, 05:04:44 am
Re: Control templates!
« Reply #1 on: November 05, 2009, 07:31:48 pm »
Logged

Turnarcades

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1973
  • Last login:May 13, 2017, 08:14:29 am
  • Craig @ Turnarcades
    • Turnarcades
Re: Control templates!
« Reply #2 on: November 05, 2009, 08:07:49 pm »
Slagcoin helps with layouts, but if you're planning on tracing routing patterns etc. you will be better off doing it once your controls arrive. If routing for joysticks from below the panel, remember you don't have to be precise so drill the centre hole first then trace the mounting plate round to mark it up.
Logged

ffingers

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 60
  • Last login:February 19, 2020, 10:57:01 am
Re: Control templates!
« Reply #3 on: November 06, 2009, 11:31:57 am »
that site is FANTASTIC...thank you  :applaud:
Logged
Flynn's Arcade - it's HERE! Build and writeup!
Pages: [1]
  
Go Up
« previous next »