Tron Control measurements

[Chunce DeLeone]

Does anyone know what the distance in inches it is from the joystick to the spinner, Center to center,  on the Tron Control Panel? 

[bungy]

Don't know off the top of my head, but I'll measure tonight when I get home.

[Chunce DeLeone]

Awsome thanks,  I am making swappable modular control panels for both a Horizontal and veritcal 19inch cabs.  So I want to do the old SF2 panel which i am working on now and then do all the classic panels like DK, Robotorn, and Tron etc etc.  I will post pic of this new project when i get a chance, it was pretty easy, not the best looking mod but literally two screws a little unistrut and 2 normal cabs and I've got endless possibilities......I have been trying to find a CPO i could download but now that the local arcade Artwork site is down i can't find a tron CPO file i can veiw or print to use as a template......thanks again

[bungy]

The spinner and joystick are exactly 9 inches apart.

Here's the rest of the measurements if you need them:
The CP is 23" x 6.5" (bend starts and 6.5" and goes another 0.25")
Both the joystick and spinner are 7" from nearest edge and 3" from the top.
Buttons are 1" from the top, first button is 10" from the left edge and second is 2" right of the first.

[Chunce DeLeone]

Awesome Thank you so much!!!!!!!!!!