Author Topic: -VENDOR- Authentic & Repo Arcade Marquees, Bartop Arcade Cabinet Kits [NJ/SHIP] (Read 29847 times)

emdkay · « **on:** October 19, 2009, 06:02:56 am »

In addition being to the #1 source for arcade marquees, we also offer bartop arcade cabinet kits and complete cabinets.

....and it's new cabinet time! Introducing..... the mini!

(this thread has been condensed to include all of our cabinets currently available)
Mini arcade cabinet kits start are $149.95; Complete arcade cabinets are $599.00
One-player arcade cabinet kits start are $199.95; Complete arcade cabinets are $799.00
Two-player arcade cabinet kits start are $249.95; Complete arcade cabinets are $999.00

For size comparison, our One-player cabinet, next to the mini, next to an Xbox 360:

Also available in melamine particleboard with black finish:

One-Player Bartop Arcade Cabinet Kit:

Two-Player Bartop Arcade Cabinet Kit:

We can also build any arcade cabinet of any design, of any size. For more details, including our 1-Player and 2-Player cabinet kits and full arcade cabinets, see http://www.emdkay.net

We've added the full lineup of Model Arcade Cabinet Replicas by JW Customs to our online store.
http://emdkay.net/catalog/model-arcade-cabinet-replicas-c-29.html

Ginsu Victim · « **Reply #1 on:** October 19, 2009, 08:34:28 am »

Since you have a Dreamcast in there, why not go 6-buttons? It appears as though there is room.

That's pretty cute, though.

versapak · « **Reply #2 on:** October 19, 2009, 08:36:42 am »

Is that a widescreen display?

If so, then it is an odd choice for dreamcast where pretty much every game will be stretched to look bad.

Other than that... Looks good.

emdkay · « **Reply #3 on:** October 19, 2009, 03:05:55 pm »

Quote from: Ginsu Victim on October 19, 2009, 08:34:28 am

Since you have a Dreamcast in there, why not go 6-buttons? It appears as though there is room.

That's pretty cute, though.

There are 7 buttons actually - I used mini buttons for left, right, and start. It can indeed fit six regular sized buttons but I wanted to have the main buttons look more like a dreamcast controller

emdkay · « **Reply #4 on:** October 19, 2009, 03:06:54 pm »

Quote from: versapak on October 19, 2009, 08:36:42 am

Is that a widescreen display?

If so, then it is an odd choice for dreamcast where pretty much every game will be stretched to look bad.

Other than that... Looks good.

It is a widescreen but most of the arcade compilation games will keep the game in correct aspect ratio with an added border.

Ginsu Victim · « **Reply #5 on:** October 19, 2009, 03:24:42 pm »

Quote from: emdkay on October 19, 2009, 03:05:55 pm

There are 7 buttons actually - I used mini buttons for left, right, and start. It can indeed fit six regular sized buttons but I wanted to have the main buttons look more like a dreamcast controller

Well, sure, I noticed that, but I know that I would drill an extra two holes if I got ahold of one.

Any info on the LCD you're putting in those? Link?

emdkay · « **Reply #6 on:** October 19, 2009, 03:30:36 pm »

Quote from: Ginsu Victim on October 19, 2009, 03:24:42 pm

Quote from: emdkay on October 19, 2009, 03:05:55 pm
There are 7 buttons actually - I used mini buttons for left, right, and start. It can indeed fit six regular sized buttons but I wanted to have the main buttons look more like a dreamcast controller

Well, sure, I noticed that, but I know that I would drill an extra two holes if I got ahold of one.

Any info on the LCD you're putting in those? Link?

This is really a demo unit showing the options, but yea definitely room for a couple more buttons on the side.

I went with this for the LCD:
http://www.haieramerica.com/en/product/HLT10

It fits perfectly inside, and has a built in battery. If I can get the Dreamcast wired up to a battery as well, it can be completely portable & free of a power outlet.

Hoagie_one · « **Reply #7 on:** October 20, 2009, 05:33:52 pm »

Will an original xbox fit inside?

emdkay · « **Reply #8 on:** October 20, 2009, 05:45:42 pm »

Quote from: Hoagie_one on October 20, 2009, 05:33:52 pm

Will an original xbox fit inside?

An original Xbox won't fit in there, but here are the inside dimensions:

bottom shelf:
width: 10 1/4"
height: 5 1/2"
depth: 9 1/4"

top shelf:
width: 10 1/4"
height: 8 1/8"
depth: 6 1/2"

Also, the buttons/controls will eat into some of the height towards the front of the bottom shelf.

versapak · « **Reply #9 on:** October 20, 2009, 05:58:43 pm »

Another thing...

I notice that the DC's fan is butt up against the side of the cab. You might want to consider a vent there. I don't know how hard it is to overheat a DC, as I have never done so to any of mine, but that seems like a sure way to find out.

emdkay · « **Reply #10 on:** October 20, 2009, 06:02:31 pm »

Quote from: versapak on October 20, 2009, 05:58:43 pm

Another thing...

I notice that the DC's fan is butt up against the side of the cab. You might want to consider a vent there. I don't know how hard it is to overheat a DC, as I have never done so to any of mine, but that seems like a sure way to find out.

I see what you mean, but it's only up against the wall because of the seven game cases next to it to illustrate the inside storage. The entire rear cover of the cabinet, though, is vented with the hole pattern and I haven't noticed any heat issues after hours of play.

Hoagie_one · « **Reply #11 on:** October 21, 2009, 12:25:24 pm »

anyone know the dimensions of a de-cased xbox?

versapak · « **Reply #12 on:** October 21, 2009, 12:47:11 pm »

Quote from: Hoagie_one on October 21, 2009, 12:25:24 pm

anyone know the dimensions of a de-cased xbox?

I found them here:
http://forums.xbox-scene.com/index.php?showtopic=622091

I am sure you could manage to squeeze an Xbox into there fairly easily. (Maybe not with the DVD drive, but an xbox with a large hdd is the only way to go anyway

)

Quote

Motherboard:
Withd=8"-6 3/4" ___________________ 20.32 centimeter - 17.145 centimeter
Height=1 1/8"-1 1/2" _______________ 2.857 5 centimeter - 3.81 centimeter
Length=8 1/4"-8 1/8" _______________ 20.955 centimeter - 20.637 centimeter

PSU:
Width=2 1/2" _____________________ 6.35 centimeter
Length=8 1/4"-7 3/4" ______________ 20.955 centimeter - 19.685 centimeter
Height=1 1/2" ____________________ 3.81 centimeter

MameMaster! · « **Reply #13 on:** October 22, 2009, 10:03:20 am »

What front end on the DC is that? I have a Mame DC EMU, but don't recognize what you're using.

emdkay · « **Reply #14 on:** October 22, 2009, 11:45:31 am »

Quote from: MameMaster! on October 22, 2009, 10:03:20 am

What front end on the DC is that? I have a Mame DC EMU, but don't recognize what you're using.

Oh actually, no front end. I'm only using compilation discs and regular Dreamcast games. The one pictured above with the game menu is Atari Anniversary Edition.

MameMaster! · « **Reply #15 on:** October 22, 2009, 02:27:41 pm »

I forgot about that one. Thanks!

emdkay · « **Reply #16 on:** November 24, 2009, 12:47:59 pm »

We've added the full lineup of Model Arcade Cabinet Replicas by JW Customs to our online store.
http://emdkay.net/catalog/model-arcade-cabinet-replicas-c-29.html

Ginsu Victim · « **Reply #17 on:** November 24, 2009, 09:36:41 pm »

Saw those somewhere else recently. They look a lot better than just making them out of paper. They need to put a black balltop on that Donkey Kong, though.

emdkay · « **Reply #18 on:** January 06, 2010, 02:30:29 pm »

Taking a step aside from our bartop arcade cabinets, we've added a custom Mountain Jukebox Marquee to our collection:
http://emdkay.net/catalog/mountain-jukebox-marquee-p-563.html

....and a good 50+ Neo Geo MVS Mini Marquees have been added as well:
http://emdkay.net/catalog/mini-marquees-c-30.html

Encryptor · « **Reply #19 on:** January 06, 2010, 10:47:12 pm »

Quote from: emdkay on November 24, 2009, 12:47:59 pm

We've added the full lineup of Model Arcade Cabinet Replicas by JW Customs to our online store.
http://emdkay.net/catalog/model-arcade-cabinet-replicas-c-29.html

No Tron?

Encryptor

versapak · « **Reply #20 on:** January 07, 2010, 02:47:28 am »

Quote from: Ginsu Victim on November 24, 2009, 09:36:41 pm

Saw those somewhere else recently. They look a lot better than just making them out of paper. They need to put a black balltop on that Donkey Kong, though.

... and white t-molding.

emdkay · « **Reply #21 on:** January 07, 2010, 03:00:18 pm »

Quote from: Encryptor on January 06, 2010, 10:47:12 pm

Quote from: emdkay on November 24, 2009, 12:47:59 pm
We've added the full lineup of Model Arcade Cabinet Replicas by JW Customs to our online store.
http://emdkay.net/catalog/model-arcade-cabinet-replicas-c-29.html

No Tron?

Encryptor

Tron may be coming in February

Encryptor · « **Reply #22 on:** January 07, 2010, 04:07:38 pm »

Quote from: Encryptor on January 06, 2010, 10:47:12 pm

No Tron?

Encryptor

Quote from: emdkay on January 07, 2010, 03:00:18 pm

Tron may be coming in February

Sweet! I'll be looking forward to it.

Encryptor

emdkay · « **Reply #23 on:** January 19, 2010, 02:09:11 am »

We've added some authentic arcade artwork to our online store, with plenty more to be added in the coming days. New categories now include:

Authentic Arcade Marquees: NOS
Authentic Arcade Marquees: Used
Authentic Arcade SideArt: NOS
Authentic Arcade CPO: NOS
Authentic Arcade Manuals

emdkay · « **Reply #24 on:** January 26, 2010, 02:23:50 pm »

For those looking to change out their coin reject button inserts while purchasing a marquee, we've added a cheap 10 assortment pack ($0.95), and 10 custom pack ($1.95), printed on our translucent polyester backlight film. Check out the BYOAC insert

http://emdkay.net/catalog/coin-reject-button-insert-labels-assortment-pack-p-1089.html

http://emdkay.net/catalog/coin-reject-button-insert-labels-custom-pack-p-1090.html

Ginsu Victim · « **Reply #25 on:** March 26, 2010, 10:52:21 am »

Maybe you should change one of those to "Push for Credit" instead of reject. I know several of us have ours set up with microswitches behind the reject, and some people use rectangular lighted pushbuttons for credit.

emdkay · « **Reply #26 on:** May 07, 2010, 05:36:37 pm »

We've been offering the Neo Geo MVS Mini marquees for a few months now, so I wanted to show them as well as our custom 150/138/120/111/109/100/X/N in 1 Multicart Mini Marquees.

You can see all MVS Mini Marquees offered here, $4.95 each:
http://emdkay.net/catalog/reproduction-mini-c-30.html

Professionally printed on either:
Resin Coated GLOSSY Photograde Paper
Resin Coated LUSTER Photograde Paper
Or upgrade to Translucent Polyester BACKLIGHT FILM for $5 additional each Mini marquee

Left: Puzzle Bobble on our Translucent Polyester BACKLIGHT FILM
Right: Baseball Stars Professional original glossy material

(larger view: http://lh3.ggpht.com/_-eftqxoZ1K0/S6z7nmoc-BI/AAAAAAAABbI/Cg7YAIdqM18/s800/DSCF1617.JPG)

Example of our Resin Coated LUSTER Photograde Paper with rear lighting:

Here are the 150/138/120/111/109/100/X/N in 1 Multicart MVS Minis. They're also $4.95 each:
http://emdkay.net/catalog/advanced_search_result.php?keywords=multicart

Examples below are Translucent Polyester BACKLIGHT FILM prints:

Note that the original MVS Minis are printed onto glossy film. Our film is semi-matte, not glossy, and less thick. They light wonderfully (I'd say better than originals) and are durable for swapping in and out of the marquee holder. Our glossy photo paper is close to the original material and has a similar thickness, but not have the extra-smooth surface of glossy film.

KuddlKat · « **Reply #27 on:** October 04, 2010, 11:05:40 am »

Quote from: Ginsu Victim on March 26, 2010, 10:52:21 am

Maybe you should change one of those to "Push for Credit" instead of reject. I know several of us have ours set up with microswitches behind the reject, and some people use rectangular lighted pushbuttons for credit.

Agreed. I would like to see "COIN / Player 1" through "COIN / Player 4" (I've only got 2 players, but others have gone all the way.)
Switch View

As it is, I'd have to order 4 unique... hmm...

emdkay · « **Reply #28 on:** October 04, 2010, 11:12:59 am »

We can work with you on the wording on the assortment pack without having to order the custom pack. Just shoot us an email.

emdkay · « **Reply #29 on:** October 22, 2010, 12:37:11 pm »

Adding to the "what else we carry" lineup, we offer a series of model arcade cabinet replicas by JW Customs. They're about 4.5" tall replicas of cabinets you likely already have in your home

The most recent addition to the series is the Halloween 2010 Special Edition Satan's Hollow. Pre-Order the Satan's Hollow replica and shipping begins 10/30/2010
http://emdkay.net/catalog/halloween-2010-special-edition-satans-hollow-model-arcade-p-1207.html

Other replicas and sets available:
http://emdkay.net/catalog/model-arcade-cabinet-replicas-c-29.html

Encryptor · « **Reply #30 on:** October 22, 2010, 01:47:14 pm »

Quote from: emdkay on January 07, 2010, 03:00:18 pm

Tron may be coming in February

I don't see a Tron in there yet.

Encryptor

saint · « **Reply #31 on:** June 30, 2011, 02:51:01 pm »

Is this still an active thread? If not I'd like to de-sticky it.

emdkay · « **Reply #32 on:** June 30, 2011, 03:02:09 pm »

I'd like to be considered active in the BYOAC community offering reproduction marquees.. but sure you can de-sticky if the forum needs to be cleaned up.

saint · « **Reply #33 on:** June 30, 2011, 07:18:33 pm »

Quote from: emdkay on June 30, 2011, 03:02:09 pm

I'd like to be considered active in the BYOAC community offering reproduction marquees.. but sure you can de-sticky if the forum needs to be cleaned up.

Nope, a ping from you is all I need

saint · « **Reply #34 on:** July 02, 2012, 10:05:20 am »

Yearly ping time

Banacek · « **Reply #35 on:** December 15, 2012, 12:27:02 am »

Are you still around? I place an order a few weeks ago and haven't heard anything. No responses to emails and PMs. Thanks

Banacek · « **Reply #36 on:** December 31, 2012, 09:04:02 pm »

Got my marquee. It looks fantastic. Thanks!

Brian74 · « **Reply #37 on:** January 18, 2013, 03:04:19 pm »

Can you do inserts for push buttons?

HaRuMaN · « **Reply #38 on:** March 14, 2013, 11:30:34 am »

This still active? Sticky trimming time.

chopperthedog · « **Reply #39 on:** March 14, 2013, 06:24:16 pm »

Quote from: HaRuMaN on March 14, 2013, 11:30:34 am

This still active? Sticky trimming time.

Hmmmm, I hope so. Hit the 20 day mark since placing an order for one marquee.

good day.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news