Author Topic: What type joystick is this? (Read 2740 times)

garnerb350 · « **on:** October 05, 2009, 11:44:40 am »

Guys i'm trying to restore the Mr Do cab...and I have no idea what type of joystick to get for it...All I know is that it is a 4 way, ball top...it has a gray plastic base and and 4 leaf switches...I'm trying to find a replacement for it, but there are so many different brands and i have no idea if they will fit correctly or not... Does any body have any pointers or know where I can find out what brand are used mostly on different cabs...

leapinlew · « **Reply #1 on:** October 05, 2009, 12:09:28 pm »

Wico

Should say WICO on the base and the hole for the joystick should be cut into a diamond pattern. If yours is a knock-off, you should replace it with a Wico.

Ginsu Victim · « **Reply #2 on:** October 05, 2009, 12:18:27 pm »

+1
What he said.

garnerb350 · « **Reply #3 on:** October 05, 2009, 12:41:45 pm »

I went to LizardLick and they have WICO offbrands ( they said that Wico has been long gone)...the ones they have on the website are temp out of stock...any other places you recommend that might carry them?

Ginsu Victim · « **Reply #4 on:** October 05, 2009, 12:46:32 pm »

I don't know about the real deal, but Mikesarcade.com carries this
http://www.mikesarcade.com/cgi-bin/store.pl?sku=JOYRBLSNEW

garnerb350 · « **Reply #5 on:** October 05, 2009, 12:58:32 pm »

Thanks Ginsu....Mike's site is blocked at my work ( dont know why...) but I will check it when i get home later)...

Ginsu Victim · « **Reply #6 on:** October 05, 2009, 02:20:01 pm »

A site can only say the words BALLS, SHAFT, and SLOTS before it's banned at work. My post might not even show up

garnerb350 · « **Reply #7 on:** October 05, 2009, 04:17:52 pm »

Nahhh they show up ....just fine....

CheffoJeffo · « **Reply #8 on:** October 05, 2009, 05:20:50 pm »

The one one Mikes is a knockoff (the screws in the leaf switch are the key). I haven't used them so I can't comment on the quality.

Wico leafs, particularly 4-ways, can be tough to find. I would spend some time checking eBay and, if you see one, snap it up. There are lots of folks who will jump on them when they see them (present company included).

Ginsu Victim · « **Reply #9 on:** October 05, 2009, 05:35:23 pm »

Quote from: CheffoJeffo on October 05, 2009, 05:20:50 pm

The one one Mikes is a knockoff

I pointed that out when I posted it.

CheffoJeffo · « **Reply #10 on:** October 05, 2009, 06:01:54 pm »

Quote from: Ginsu Victim on October 05, 2009, 05:35:23 pm

Quote from: CheffoJeffo on October 05, 2009, 05:20:50 pm
The one one Mikes is a knockoff

I pointed that out when I posted it.

Sorry ... I must have you on ignore and missed it !

Ginsu Victim · « **Reply #11 on:** October 05, 2009, 06:31:58 pm »

Bollocks. You wouldn't have got the last message.

Or this one.

garnerb350 · « **Reply #12 on:** October 06, 2009, 08:08:29 am »

I ended up ordering from Mike last night...paid 15 bucks...

I spent last night working on the coin door, ( painting) and I was looking at the joystick base on the CP and I couldnt find a logo anywhere on it... I didnt want to unscrew it...because I know when i switch everything into the new cab, I didnt want to mix up the wiring... Seems to me that maybe the one that was installed (joystick) might be a knockoff as well...

mytymaus007 · « **Reply #13 on:** October 06, 2009, 10:02:35 am »

let us know how those sticks are when you get them installed

garnerb350 · « **Reply #14 on:** October 06, 2009, 10:11:38 am »

Will do...

drventure · « **Reply #15 on:** October 06, 2009, 10:37:20 am »

Man that cab looks rough. Hard to imagine how they get that bad (or worse), but kudos for restoring it!

garnerb350 · « **Reply #16 on:** October 06, 2009, 11:05:09 am »

Quote from: drventure on October 06, 2009, 10:37:20 am

Man that cab looks rough. Hard to imagine how they get that bad (or worse), but kudos for restoring it!

haha...yeah everytime i step up to it, I always give a sigh....makes me wonder what hell it went through to end up the way it did...Luckily I was able to have an empty Ladybug cab that was in better shape...I spent last weekend painting the interior...probey next couple weeks, I'm going to start moving the components from one cab to the other...Kinda dreading it...cuz I have no idea what i'm doing...hahaha

2600 · « **Reply #17 on:** October 06, 2009, 11:23:43 am »

Quote from: CheffoJeffo on October 05, 2009, 05:20:50 pm

The one one Mikes is a knockoff (the screws in the leaf switch are the key). I haven't used them so I can't comment on the quality.

Actually, Wico did have a version with screws in the leaf. That's the version of joystick these new knockoffs are copying. Look in an Elevator Action Manual or any older Taito or Sega Manual and search for the Joystick Assembly part of the manual.

http://arcarc.xmission.com/PDF_Arcade_Manuals_and_Schematics/Elevator%20Action.pdf

CheffoJeffo · « **Reply #18 on:** October 06, 2009, 11:28:24 am »

Learn something new everyday !

garnerb350 · « **Reply #19 on:** October 06, 2009, 11:33:47 am »

Thanks 2600....that manual will come in handy...Yeap that looks like the joystick...plus the coin door shematics look simualr to the one i'm redoing...

Now i might get chastized for this...but the only modifaction that i will do is probley replace the leaf switches with cherries...Now I dont know why...but for some reason i like cherry switches compared to leaf ones...I ordered the joystick from mike and got 3 happ pushbuttons from Lizardlick ( they were on sale)...

Ginsu Victim · « **Reply #20 on:** October 06, 2009, 11:52:12 am »

Quote from: garnerb350 on October 06, 2009, 11:33:47 am

Now i might get chastized for this...but the only modifaction that i will do is probley replace the leaf switches with cherries...

Um.....what?


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news