Author Topic: MAME Compile Issue (Read 841 times)

Avenger257 · « **on:** September 27, 2009, 10:25:06 pm »

This is my first time compiling MAME (using the hi_score diff). It appears that everything has turned out wonderfully except for one thing. When I hit tab to pull up the menu, it comes up and I can read everything but as soon as I select Player 1 (or 2 or 3 etc) I can't read anything. It just looks like a bunch of white boxes. Any help would be appreciated...

Ginsu Victim · « **Reply #1 on:** September 27, 2009, 10:56:35 pm »

Is the MAME.INI set to DirectDraw? If so, try Direct3D. Also, what is your resolution set at? (Both in MAME and your desktop)

Avenger257 · « **Reply #2 on:** September 28, 2009, 06:59:42 pm »

I changed it and now it works fine! Thank you!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: MAME Compile Issue (Read 841 times)

Avenger257

MAME Compile Issue

Ginsu Victim

Re: MAME Compile Issue

Avenger257

Re: MAME Compile Issue