Author Topic: 2 project cabs (Chesterfield, Va) (Read 1864 times)

Oni2382 · « **on:** August 28, 2009, 11:56:00 pm »

I have 2 empty cabs that I am trying to get rid of in order to make room in the garage. 1 is a generic cab used for Golden Tee 3d, and the other is a Dynamo cab.

Both are bare and WILL NOT have the monitor, PCB, power supply or coin door/mechs they will have the coin frames however. Both are in great shape cab wise with minimal dings, the dynamo cab has 2 wholes drilled in the front I presume it was once a shooting game of some sort.

Dimensions are as follows.

Dynamo 27in.W, 33in.D, 74in.H
Golden Tee 25in.W, 39in.D, 74in.H

Asking $50 each.

P.S. The Dynamo cab comes with the control panel. It's drilled for 6 buttons (street fighter.)

tcleary · « **Reply #1 on:** August 31, 2009, 06:32:11 pm »

va is a pretty big state, put your city

Oni2382 · « **Reply #2 on:** August 31, 2009, 10:42:50 pm »

Quote from: tcleary on August 31, 2009, 06:32:11 pm

va is a pretty big state, put your city

Richmond Area


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: 2 project cabs (Chesterfield, Va) (Read 1864 times)

Oni2382

2 project cabs (Chesterfield, Va)

tcleary

Re: 2 project cabs (Va,US.)

Oni2382

Re: 2 project cabs (Va,US.)