Happy Haul

[endrien]

Well today I managed to get the following for 50$ :
working hatris cocktail with out of focus monitor(Should easily be fixed)
pretty much new mortal kombat 2 upgrade kit(Board, marquee)
Sega cartridge based system with decathlete
Mystery data east board(Have to test to find out)
Heavy Unit board
2 jamma harnesses
1 key/lock
3 monitor chassis for parts

I'm a pretty happy man
I'll post up a video/pics when I get the cocktail unloaded!

Video:





after a little bit of cleanup on the cocktail:

[endrien]

Video and pics uploaded.

[Beretta]

wow you got all that for 50 bucks total? very nice indeed.

[saint]

Nice haul!

[severdhed]

very nice find...makes my $50 gutted donkey kong seem like much less of a good deal

[Ummon]

Where did you get this, and what city/state are you in?

That cocktail being 2P like that just hollers for a JPAC, or jamma switch board. Perhaps both.

[endrien]

You know....It is already jamma.

[Finchbyrd]

Very nice. As long as you have the back open, unscrew the nut that holds the lock in and get it out, or use a screw driver on the back of the lock and unscrew the bolt holding the lock arm in, run to home depot and buy you a caster lock, 5/8" probably

[endrien]

I have the back and coin door locks working fine. I don't have the key to the coin area on the bottom though....

[bkenobi]

Just drill the lock.  If you don't have the key, it's useless anyway.  That's how you get a standard lock open, so I assume you can do the same for a barrel lock mechanism.

[endrien]

Alright, I'll do that tomorrow when it isn't so early in the morning.

[Finchbyrd]

I had to drill all 3 locks on my stand-up cab, its a pain. I broke a few bits because I was rushing, if its standard keyholes then go for drilling them out, just take your time and it'll work. Once you bore the keyhole open you're then drilling into the screws tip.

[endrien]

Mystery Data East board is fighters history

[endrien]

Coin area lock drilled out fine, I'll get a new one next time I'm out.

[Shortbus]

I will give you $60 for it, huh? Huh? you'd make $10, not a bad deal...

kidding, great deal man, I'd be all over that in a heartbeat! good luck!