Author Topic: WG D9200 not holding calibration??? (Read 1120 times)

zmartin34 · « **on:** August 17, 2009, 11:12:55 pm »

I'm running a D9200 with ArcadeVGA and Mame. Looks great but I noticed tonight that out of nowhere the tilt developed a pitch again and some of the horiz and vert adjustments were slightly out on several resolutions.

I had me PC running last night defragging the discs. Would feeding the monitor a signal do this even if its turned off? Long shot but I don't know

Anyone else have calibration go out from time to time on this monitor?

Thanks!

zmartin34 · « **Reply #1 on:** August 18, 2009, 02:19:44 pm »

How often do you D9200 owners have to re-calibrate?

gokun · « **Reply #2 on:** August 19, 2009, 02:50:19 am »

prior to its recent repair I only had to readjust mine a few times(2-3) in the course of about 6-8 months...when I did have to it was because I put a different system in it. I only use arcade boards though so bare that in mind...

zmartin34 · « **Reply #3 on:** August 19, 2009, 10:56:11 am »

Thanks for the input.

Anyone running Mame with resolution switching and a D9200 have some input?


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: WG D9200 not holding calibration??? (Read 1120 times)

zmartin34

WG D9200 not holding calibration???

zmartin34

Re: WG D9200 not holding calibration???

gokun

Re: WG D9200 not holding calibration???

zmartin34

Re: WG D9200 not holding calibration???