Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: what is this spintrak part (screw?)  (Read 1580 times)

0 Members and 1 Guest are viewing this topic.

saleem

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 437
  • Last login:February 07, 2012, 08:03:39 am
what is this spintrak part (screw?)
« on: July 30, 2009, 09:29:05 am »
i got my spintrak today and i bought the flywheel which came attached.the spintop was not,obviously thats because the spintrak needs fitting to the cp.now the flywheel is attached to the spintrak using 2 screws,they are allen key and they are screwins but,not screws.

it looks like i need 2 of these for the spintop.

if you look at the pic you can see the little holes these things screw into.
http://www.ultimarc.com/SpinTrak.htm

what are they called please so i know what i need to get.
:)

thecheat

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 85
  • Last login:October 16, 2009, 11:58:55 am
Re: what is this spintrak part (screw?)
« Reply #1 on: July 30, 2009, 09:59:26 am »
You mean a set screw?



McMaster Carr for sure but you ought to be able to get 'em at a local hardware store. Should be able to get it from your spinner supplier.

saleem

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 437
  • Last login:February 07, 2012, 08:03:39 am
Re: what is this spintrak part (screw?)
« Reply #2 on: July 30, 2009, 10:11:35 am »
yes,thanks.i did indeed do some googling and found out they are set screws.but,the size?

i also dug up an old post while googling and its on site,so i made post there also i have contacted ultimarc.
:)

bkenobi

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1668
  • Last login:August 16, 2021, 10:41:52 pm
Re: what is this spintrak part (screw?)
« Reply #3 on: July 31, 2009, 11:21:19 am »
Shouldn't Andy have included these with the spinner kit?  The flywheel isn't much good without a way to attach it.

AndyWarne

  • Trade Count: (+18)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1938
  • Last login:April 11, 2021, 03:37:09 am
    • Ultimarc
Re: what is this spintrak part (screw?)
« Reply #4 on: July 31, 2009, 11:29:50 am »
Absolutely these should have been included. I thought we had weeded out all the ones without screws but looks like we need to re-check.
If you can drop me an email I will send them.