Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Jamma into monitor  (Read 1500 times)

0 Members and 1 Guest are viewing this topic.

MR SAMSA

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 14
  • Last login:April 06, 2019, 07:04:10 am
  • I'm a llama!
Jamma into monitor
« on: July 28, 2009, 02:06:42 pm »
I have a tekken tag jamma board that works fine and I am trying to plug it into a 21inch apple crt monitor and no video is being out put. 

I tried my 18.1 inch dell lcd and it says the signal is out of range.  I can hear the apple monitor trying to output but it doesn't.

The tekken board i read  (output sync can be 15kHz or 31kHz) and should auto detect the vga.

Do need crappier monitors? What am I doing wrong?

Thanks, SaMSa :afro:

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 14021
  • Last login:August 01, 2025, 09:20:08 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Jamma into monitor
« Reply #1 on: July 29, 2009, 01:59:28 pm »
it wont work on a PC monitor, that connector is more for the JVS standard then a normal VGA monitor
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.