Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Still planning... Do I have all my parts?  (Read 1424 times)

0 Members and 1 Guest are viewing this topic.

Turf

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 17
  • Last login:August 02, 2024, 02:15:59 pm
Still planning... Do I have all my parts?
« on: July 22, 2009, 05:25:54 pm »
Hey there boys and girls.  This is my first post here.  I know ya'll get a bunch of first timers here so what's one more right?  Anyway, I wanted to run this by all you old-timers out there.  I'm working on my part list for my CP.  I'm about to start buying my parts and need to know if this is all I need.  Here we go
 
1) U360 x2
2)Electric Ice T trackball
3)LED-Wiz x2
4)Electric Ice buttons w/ RGB board, LED, and all included x19

I think that is all.  The LED-Wiz will control 32 inputs, right?  3 for each button and 3 for the trackball.

3 x 20= 60 inputs needed
2x LED-Wiz = 64 inputs

As for the pushbuttons, the U360's allow 8 and the trackball allows 3 right? 
I'm a full on new at all of this so just bare with me.  I'm doing my best to research before asking stupid questions.  I just don't want to buy a  bunch of stuff I don't need or won't work.

Ginsu Victim

  • Yeah, owning a MAME cab only leads to owning real ones. MAME just isn't good enough. It's a gateway drug.
  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10092
  • Last login:June 28, 2025, 10:45:55 pm
  • Comanche, OK -- USA
Re: Still planning... Do I have all my parts?
« Reply #1 on: July 22, 2009, 05:52:50 pm »
Welcome. Sounds like you've done your homework.

So for your 8 inputs, is that 6 per player plus start and coin? Are you shifting everything else or just relying on a keyboard for any admin functions?

Turf

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 17
  • Last login:August 02, 2024, 02:15:59 pm
Re: Still planning... Do I have all my parts?
« Reply #2 on: July 23, 2009, 04:37:16 pm »
That's 6 player buttons, start and coin on each U360.  Then on the trackball, I'm planning on exit, pause, and shift (I think the I'll put shift on there).  I'm also planning on using a drawer for a keyboard and mouse.  That would probably be easier if/when anything goes wrong.  Thanks for your help man.