Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: ROWE R-89 amplifier swap.  (Read 1749 times)

0 Members and 1 Guest are viewing this topic.

jukefever

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11
  • Last login:July 30, 2009, 04:48:09 pm
ROWE R-89 amplifier swap.
« on: July 18, 2009, 03:54:14 pm »
Aside from changing to higher wattage speakers, will any other changes need to be in place if I want to take out the existing amp in my R89 and change it out to a ROWE 61024903 amplifier@250 WATTS? Would it be plug n play? What about the crossovers? I like the diversity that this amp offers regarding the equalizer.

ami-man

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1085
  • Last login:July 19, 2020, 01:22:45 pm
Re: ROWE R-89 amplifier swap.
« Reply #1 on: July 19, 2009, 02:11:09 am »
Hi Tim,

The amp should just plug in, the phono input is at the opposit end but the cable should be ok. All the other connections are the same as your 130 watt amplifier.

I would leave the speakers unless you have problems with them because I doubt that you will have it any louder in your location.

Regards
Alan

Alan Hood
ami-man
UK

jukefever

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11
  • Last login:July 30, 2009, 04:48:09 pm
Re: ROWE R-89 amplifier swap.
« Reply #2 on: July 19, 2009, 02:52:40 pm »
Thank you Alan!

ami-man

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1085
  • Last login:July 19, 2020, 01:22:45 pm
Re: ROWE R-89 amplifier swap.
« Reply #3 on: July 20, 2009, 04:24:48 am »
Hi Tim,

No problem.

Regards
Alan