Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Jamma connector missing pins w/jpac  (Read 1686 times)

0 Members and 1 Guest are viewing this topic.

Chunce DeLeone

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 414
  • Last login:August 16, 2012, 02:58:11 pm
Jamma connector missing pins w/jpac
« on: July 15, 2009, 10:06:15 am »
I have a jamma cab hooked up to a jpac and want ot use all of the controls but some of the pins on the jamma connector are not there.  Where do I get those pins? 

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: Jamma connector missing pins w/jpac
« Reply #1 on: July 15, 2009, 10:09:10 am »
Several ways:

1) raid another JAMMA harness (or similar) for the wires and pins.

2) buy the pins and wire and add it to the harness

3) buy a whole new harness and use that.

Chunce DeLeone

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 414
  • Last login:August 16, 2012, 02:58:11 pm
Re: Jamma connector missing pins w/jpac
« Reply #2 on: July 15, 2009, 11:49:30 am »
where can i get hte pins and wire?

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: Jamma connector missing pins w/jpac
« Reply #3 on: July 15, 2009, 12:12:06 pm »
I'm sure Bob Roberts has the pins.  Wire too, if you ask.

Chunce DeLeone

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 414
  • Last login:August 16, 2012, 02:58:11 pm
Re: Jamma connector missing pins w/jpac
« Reply #4 on: July 15, 2009, 03:01:57 pm »
Found them at Bob's thank you SirPeale
http://arcadecontrols.com/BBBB/jam-key.jpg

This is perfect!!!!   :woot