Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Bought a used IPAC 4  (Read 926 times)

0 Members and 1 Guest are viewing this topic.

GaryMcT

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 745
  • Last login:September 24, 2014, 11:19:27 am
    • GaryMcT's arcade blog
Bought a used IPAC 4
« on: July 04, 2009, 03:10:18 am »
I can't seem to find any information about the old model online.  Will it do USB?  Do I have to set a jumper to get it to do USB?  Do the current model USB cables work with it?

Here's a picture of the one that I have. . thanks!

My blog on learning how to develop FPGA versions of arcade boards: http://garymct.blogspot.com


GaryMcT

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 745
  • Last login:September 24, 2014, 11:19:27 am
    • GaryMcT's arcade blog
Re: Bought a used IPAC 4
« Reply #1 on: July 04, 2009, 03:11:13 am »
Also, does it support a shift key and programming?
My blog on learning how to develop FPGA versions of arcade boards: http://garymct.blogspot.com


Ummon

  • Trade Count: (+13)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5244
  • Last login:June 09, 2010, 06:37:18 pm
Re: Bought a used IPAC 4
« Reply #2 on: July 05, 2009, 05:17:50 pm »
Notice the little red jumpers, and the text on the PCB that correspond to them.
Yo. Chocolate.


"Theoretical physics has been the most successful and cost-effective in all of science."

Stephen Hawking


People often confuse expressed observations with complaint, ridicule, or - even worse - self-pity.

GaryMcT

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 745
  • Last login:September 24, 2014, 11:19:27 am
    • GaryMcT's arcade blog
Re: Bought a used IPAC 4
« Reply #3 on: July 05, 2009, 05:36:10 pm »
Notice the little red jumpers, and the text on the PCB that correspond to them.

Thanks!

I already figured that out, made a cable, and got it working!  Sweet.
My blog on learning how to develop FPGA versions of arcade boards: http://garymct.blogspot.com