Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Trimming adhesive vinyl  (Read 1032 times)

0 Members and 1 Guest are viewing this topic.

bungy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 107
  • Last login:February 06, 2020, 09:33:40 am
Trimming adhesive vinyl
« on: July 01, 2009, 01:25:59 pm »
Does anyone have experience trimming adhesive vinyl once it has been applied to the side of a cabinet?  I am using HAPP's black pica vinyl.  I did a few tests trimming with a bare razor blade - it works well on the straight edges, but the inner and outer rounded corners are a bit of a problem.

Maybe it would look good to leave 1/8" to 1/4" hang over the edge and fold it under the t-molding.  Has anyone tried this?
Logged

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 14021
  • Last login:August 01, 2025, 09:20:08 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Trimming adhesive vinyl
« Reply #1 on: July 01, 2009, 01:49:35 pm »
Quote from: bungy on July 01, 2009, 01:25:59 pm
Maybe it would look good to leave 1/8" to 1/4" hang over the edge and fold it under the t-molding.  Has anyone tried this?

I use an exacto knife and leave a little overhand to go under the tmolding
Logged
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

Ginsu Victim

  • Yeah, owning a MAME cab only leads to owning real ones. MAME just isn't good enough. It's a gateway drug.
  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10092
  • Last login:June 28, 2025, 10:45:55 pm
  • Comanche, OK -- USA
Re: Trimming adhesive vinyl
« Reply #2 on: July 01, 2009, 02:22:59 pm »
Quote from: Malenko on July 01, 2009, 01:49:35 pm
Quote from: bungy on July 01, 2009, 01:25:59 pm
Maybe it would look good to leave 1/8" to 1/4" hang over the edge and fold it under the t-molding.  Has anyone tried this?

I use an exacto knife and leave a little overhand to go under the tmolding

This.
Logged
Pages: [1]
  
Go Up
« previous next »