Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: ls-30 wiring harness  (Read 2206 times)

0 Members and 1 Guest are viewing this topic.

arthur071169

  • Trade Count: (+1)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 7
  • Last login:June 28, 2011, 11:10:24 am
ls-30 wiring harness
« on: June 06, 2009, 03:15:41 pm »
Hi all.
I am expeciting in the next week or so an imported LS-30 I have bought from quarterarcade.com
I am now wondering if/where can I obtain the wiring harness?  I will be buying the USB interface from ultimarc, but now realise I need to connect the two together !
I was just so pleased to find the stick, I would worry about the wiring later..
Is it a straight 1-1 pin config?  I live in the uk, so any links to a supplier here firstly would be great, but can happily buy from anywhere global.
:)

bkenobi

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1668
  • Last login:August 16, 2021, 10:41:52 pm
Re: ls-30 wiring harness
« Reply #1 on: June 06, 2009, 04:36:51 pm »
No, of course not  :dizzy:

The wiring schematic for the LS-30 is available from a few places (even Ultimarc as I recall).  I am pretty sure RandyT posted a schematic on GGG now too (since he's selling the GP-WizRX units now.  You basically just need to get ground (pin 7 if I remember correctly) and then connect the other pins into 3 groups.  Then, connect those 3 groups to the 3 pins on the board you are using.  You can use header pins to make the female LS-30 wiring harness into a male connector if you don't want to clip the connector off the end (I didn't on mine).

arthur071169

  • Trade Count: (+1)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 7
  • Last login:June 28, 2011, 11:10:24 am
Re: ls-30 wiring harness
« Reply #2 on: June 06, 2009, 07:09:45 pm »
heck..
ok well.   I guess I need to (in order to keep my wiring tidy) locate ls-30 harnesses (1 anyway).
why is nothing ever consistent with different manufacturers...
Thank heck for USB.
:)

bkenobi

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1668
  • Last login:August 16, 2021, 10:41:52 pm
Re: ls-30 wiring harness
« Reply #3 on: June 06, 2009, 10:46:07 pm »
Oh, I just reread and realized I missed something.  I thought you were buying the harness for your LS-30's.  Since that's not the case and you are actually looking for harnesses, I can tell you....you are screwed!   :angry:

I have 2 LS-30's and really like them (I use them for my primary controllers, so I guess I don't have anything else to compare them to).  Anyway, they didn't come with any wiring harnesses.  There were some wires soldered onto the joystick switches, but nothing connected to the rotary switch.  I found that there is NOWHERE to buy the stupid harness.  I eventually found a guy that posted a guide for how to make a Happs 49 way into a rotary stick and was selling kits.  He sold me a few connectors for a good price, so I built my own.

I don't have the info at the moment, but the connectors are basically just standard 13-pin PC female header blocks.  I can't remember if they are 0.1" spacing or not, but you can always just measure to be sure.  These things are available at Mouser or DigiKey once you figure out what the specs are.

arthur071169

  • Trade Count: (+1)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 7
  • Last login:June 28, 2011, 11:10:24 am
Re: ls-30 wiring harness
« Reply #4 on: June 07, 2009, 05:21:19 am »
positive mental attitude!
I never thought I would find an LS-30...
Now I have one (on it's way at least).
I also never thought I would have a 'real' S.wars flight yoke..  got one of those...
Patience... (and luck).
If the wiring info is available, I can mock up the necessary...
It will be connecting to the rotary interface/usb anyway and not going into an Ikari cabinet  so looks/authenticity are not essential.

:)

rolins

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38
  • Last login:July 17, 2011, 05:26:08 pm
Re: ls-30 wiring harness
« Reply #5 on: June 07, 2009, 06:09:37 am »
@arthur071169

If you need a LS-30 harness, I can sell you one that I assembled myself even uses the original 13pin connectors. I made it 5 feet long using 22ga stranded wire. Send me a PM if you're interested. :)

dirkomatic

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 118
  • Last login:June 14, 2023, 10:40:35 pm
Re: ls-30 wiring harness
« Reply #6 on: June 07, 2009, 09:32:22 pm »
I also never thought I would have a 'real' S.wars flight yoke..  got one of those...
Patience... (and luck).

Someone just got one on ebay yesterday for $105 + shipping...

bkenobi

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1668
  • Last login:August 16, 2021, 10:41:52 pm
Re: ls-30 wiring harness
« Reply #7 on: June 07, 2009, 11:27:08 pm »
Which is why I'll never own a SW Yoke!  Holly CRAP!!!   :dizzy:

arthur071169

  • Trade Count: (+1)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 7
  • Last login:June 28, 2011, 11:10:24 am
Re: ls-30 wiring harness
« Reply #8 on: June 10, 2009, 10:30:13 am »
If you think that is bad, I bought mine 2 years ago from Westcontrols.com
have a look, and then prepare to swear.
:(
To be fair, it is in 'immaculate' condition, and came with a dual input analog gpac interface.

bkenobi

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1668
  • Last login:August 16, 2021, 10:41:52 pm
Re: ls-30 wiring harness
« Reply #9 on: June 10, 2009, 11:13:49 am »
I bet I could contract a machine shop to build me a new yoke out of titanium for less than that?!  WTF!!!   :angry:

So I guess I'm definitely not buying a WestControls yoke.   :dunno