Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Ikari Sticks and Opti-PAC  (Read 854 times)

0 Members and 1 Guest are viewing this topic.

Beaps

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 108
  • Last login:July 09, 2020, 10:46:40 am
Ikari Sticks and Opti-PAC
« on: May 10, 2009, 06:38:57 pm »
Hi All,

I got an SNK Ikari Stick and wanna wire it to my Opti-PAC.

The problem I have is I dont have a clue where to start. Do I run wires from microswitches to the Opti-PAC or from the large lomb on the bottom?

Logged

Ninten-doh

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 584
  • Last login:March 31, 2017, 10:37:18 am
  • I promise sweetie, this is my last cab purchase
Re: Ikari Sticks and Opti-PAC
« Reply #1 on: May 10, 2009, 08:28:14 pm »
Not sure if you can use an Opti-Pac for what you want to do, but Ultimarc has a dedicated interface for this for interfacing the 13 pin wiring harnesses:

http://www.ultimarc.com/rotary.html

The microswitches are connected as any regular joystick would be connected.  I think Randy T at GroovyGameGear has a rotary solution as well.

Good luck!   :cheers:
Logged
Pages: [1]
  
Go Up
« previous next »