Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Opti Pac mouse button?  (Read 815 times)

0 Members and 1 Guest are viewing this topic.

Ghoward

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 449
  • Last login:July 09, 2021, 10:45:22 pm
  • Mame rocks!!
Opti Pac mouse button?
« on: July 02, 2003, 09:59:58 am »
Hi

Could someone tell me if on an Opti-Pac you can connect left and right mouse buttons or is that done via the Ipac or can you do this at all.

Thank You

Gary

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5943
  • Last login:July 11, 2018, 09:52:14 pm
  • What Me Worry?
Re:Opti Pac mouse button?
« Reply #1 on: July 02, 2003, 12:46:31 pm »
Quote from the Ultimarc site.

Buttons. (Optipac)

If required connect two buttons to the button connections as marked (ie Port 1 L=left button. Port 1 R=right button). For each button, one connection goes to one of the four button inputs, the other goes to any connection marked "GND". You can use your control-panel buttons which are already connected to an I-PAC board. Just wire them to both an I-PAC input and an Opti-Pac mouse button input.

BobA