Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Random question  (Read 2392 times)

0 Members and 1 Guest are viewing this topic.

Gonzo22

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 24
  • Last login:April 22, 2010, 12:52:23 am
Random question
« on: April 20, 2009, 09:35:11 pm »
Hope this is the right forum for this, sorry if it isnt.

Does anyone know if a full size donkey kong will fit in the back of a ford explorer? I have a 2000, and I am going to check according to jakobuds plans, but was just wondering if anyone knew off hand.

Thanks for any response.

severdhed

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2975
  • Last login:December 14, 2024, 05:01:52 pm
  • RIP Dinosaur Hippo
Re: Random question
« Reply #1 on: April 21, 2009, 12:53:31 am »
i don't know for sure, but if i had to guess, i'd say yes, it will fit.  i hauled a few cabinets in the back of my friend's 96 jeep grand cherokee, which i believe has a smaller cargo area than the explorer, including a 25" dynamo cabinet. i dont think a DK cabinet is anywhere near as big as the dynamo

here is the cabinet in question:

www.severdhed.com/images/dynamo1.JPG

Current Projects:      Zak-Man | TMNT Pedestal | SNES Pi | N64 Odroid
Former Projects:     4 Player Showcase | Donkey Kong | iCade

Jack Burton

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1384
  • Last login:April 07, 2025, 02:12:05 pm
  • .
Re: Random question
« Reply #2 on: April 21, 2009, 01:11:52 am »
Another vote for yes.

A guy I know picked up a Super Pac-cab from me in a little hatchback and said he had also hauled DK's in it.  It was a lot smaller than an Explorer.

XeviouS

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • Last login:March 11, 2016, 08:38:20 am
    • Noah's Arkade
Re: Random question
« Reply #3 on: April 21, 2009, 04:54:18 am »
.

arzoo

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2093
  • Last login:January 26, 2025, 08:51:53 am
  • Robots WILL kill you.
    • LEDBlinky
Re: Random question
« Reply #4 on: April 21, 2009, 08:44:00 am »
Yes - it will fit (with the back seats down obviously) but you will have to lay it on its side.
Robots will kill you.



Arcade Addiction

javeryh

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7969
  • Last login:Today at 08:55:44 am
Re: Random question
« Reply #5 on: April 21, 2009, 09:54:49 am »
I'm going to say yes.  A Donkey Kong fits in my MDX no problem (with the seats down, obviously).

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 14021
  • Last login:August 18, 2025, 01:56:40 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Random question
« Reply #6 on: April 21, 2009, 10:44:53 am »
i don't know for sure, but if i had to guess, i'd say yes, it will fit.  i hauled a few cabinets in the back of my friend's 96 jeep grand cherokee, which i believe has a smaller cargo area than the explorer, including a 25" dynamo cabinet. i dont think a DK cabinet is anywhere near as big as the dynamo

here is the cabinet in question:

www.severdhed.com/images/dynamo1.JPG



cat fits too!
man, I'd kill for that marquee, still got it, wanna sell it?
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

MrMojoZ

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 291
  • Last login:June 25, 2009, 11:34:56 pm
Re: Random question
« Reply #7 on: April 21, 2009, 11:01:00 am »
Those cat graphics are sweet.

garnerb350

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 892
  • Last login:May 09, 2019, 09:36:49 pm
  • Crowded elevators smell different to midgets...
    • Hyperspin
Re: Random question
« Reply #8 on: April 21, 2009, 03:21:36 pm »
put the back seats down...and buy some rope...and tie down the trunk door with a heavy blanket underneath....the cab should be at least 5 feet....( top of my head measurement)...
“If first you don't succeed, then skydiving definitely isn't for you..." ~ Jack Handy

Gonzo22

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 24
  • Last login:April 22, 2010, 12:52:23 am
Re: Random question
« Reply #9 on: April 21, 2009, 04:41:02 pm »
Wow thanks for all the answers guys, If all goes well I should be picking one up this friday night.
I try and post some pics of the (hopefully, small ) restoration.
Looks like my scratch built one will be on hold for awhile....

severdhed

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2975
  • Last login:December 14, 2024, 05:01:52 pm
  • RIP Dinosaur Hippo
Re: Random question
« Reply #10 on: April 21, 2009, 08:29:25 pm »
i don't know for sure, but if i had to guess, i'd say yes, it will fit.  i hauled a few cabinets in the back of my friend's 96 jeep grand cherokee, which i believe has a smaller cargo area than the explorer, including a 25" dynamo cabinet. i dont think a DK cabinet is anywhere near as big as the dynamo

here is the cabinet in question:

www.severdhed.com/images/dynamo1.JPG



cat fits too!
man, I'd kill for that marquee, still got it, wanna sell it?


sorry, i gave that cabinet to a friend when i moved last summer..i just didn't think i'd have the room for it.  my wife still thinks we don't have the room for it, but i'm trying to convince her otherwise.  I don't think he has done anything with the cabinet since i took it over there, but i don't really want to just ask for it back. 
Current Projects:      Zak-Man | TMNT Pedestal | SNES Pi | N64 Odroid
Former Projects:     4 Player Showcase | Donkey Kong | iCade

Gonzo22

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 24
  • Last login:April 22, 2010, 12:52:23 am
Re: Random question
« Reply #11 on: April 22, 2009, 11:56:57 pm »
Well, the guy I bought the game from had a schedule opening, and I went and picked it up tonight insead of friday and Im now the owner of my first arcade game. It was a donkey kong converted to a vs. system and back to a donkey kong. The monitor looks great, and the controls are solid. I think most of it is original from when it was made so I have a bit of a decision to make as whether or not to really restore some minor blemishes, or to leave them as is and keep it original..

Once I get started I'll post a topic in restorations.

Oh, and it fit in my explorer, thanks for all the answers!