Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Interface driving me nuts! Please help!  (Read 855 times)

0 Members and 1 Guest are viewing this topic.

AE35

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 615
  • Last login:January 18, 2022, 01:48:24 pm
  • That sure is a nice raygun!
Interface driving me nuts! Please help!
« on: April 14, 2009, 11:39:30 am »
I almost don't know where to start. I'm in the process of using
emulation in my SCI, and for that purpose I have an Opti-Pac
and an I-Pac. For now, the I-pac is trying to destroy my life.
It lights up(diode) but will not accept any input OR keyboard
passtrough. I've tried two different I-pacs, with no luck. I'm
certain it isn't the units, but something else. Does MSI perhaps
have something different in the PS/2 voltage or whatever?

I've tried with NO leads but the PS/2 cable from the PC to the I-PAC and
from the I-PAC to the keyboard. No luck, these two units won't accept anything.
I've never had problems with I-PACS before, so I'm thinking that maybe mobos
are different or??

I'm ready to accept Mars rays to be the cause...

Any advice at all?


BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5943
  • Last login:July 11, 2018, 09:52:14 pm
  • What Me Worry?
Re: Interface driving me nuts! Please help!
« Reply #1 on: April 14, 2009, 12:32:31 pm »
Does it produce the 2 flashes when you boot the computer showing it is working OK?   On costantly without the flashes is an error condition for P1 SW6 i think.
If it does produce the flashes send an email to Andy and I am sure he will help you out.