how to mount my monitor

[abzman2000]

I'm looking for some feedback on my  (tentative) choice of monitor mounts.  images follow






my monitor is a WG 25" k7191
main project thread http://forum.arcadecontrols.com/index.php?topic=80852.0

[BobA]

Not sure the overall support you are going to have but some of those strips of wood look a little thin for the weight and torque of a 25 inch monitor.   This is just a gut feeling from the pictures viewed.

[abzman2000]

that's what I was thinking, what is the conventional way to mount these sorts of monitors?

[javeryh]

Run a 2x4 or strip of plywood from underneath the v-shaped pieces you made to the base of the cabinet.  They will act like columns and distribute the load.  I think that will work.

[TOK]

That looks kinda weak. I built a shelf... 1/2" ply with the bottom boxed using wood the size of your mounts. I built that to hold the weight and the top mount is just a small piece for position similar to what you're using.
The whole chassis rests on the shelf.

I was in a hurry to get it done the other day, so I didn't take pics as I was going, sorry.

[Ed_McCarron]

That looks kinda weak.

Yup.  That green tape will never hold.

Shelf.  Gotta be the easiest way to go, as long as the monitor will work with it.

[abzman2000]

shelf is in the works for the weekend, then prime and paint the rest of it.  It will probably be made out of 3/4" plywood, is that good enough?

[BobA]

A 3/4 inch plywood shelf should be fine as long as it has good support along the sides.

[hammyysu]

on my cabinet i use 3/4" plywood and for the braces i used anel iron to hold the shelf then screwed the wood to the metal. it works great. or find yourself an old cabinet and look how they did it.