Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: wood preperation before overlay goes on?  (Read 1184 times)

0 Members and 1 Guest are viewing this topic.

mytymaus007

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1025
  • Last login:September 18, 2023, 09:58:40 am
  • http://gameroom.atozmicro.com
    • http://gameroom.atozmicro.com
wood preperation before overlay goes on?
« on: March 27, 2009, 11:20:14 pm »
I was wondering if i should paint the control panel with a primer paint before i put on a 10ml thick adhesive overlay. Would it stick better with the paint not sure the best paint to use or should i stick it to the bare wood regular 3/4 plywood Im not using lexan just the 10ml overlay

mrclean

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1532
  • Last login:August 10, 2022, 08:30:36 am
  • World Record Holder for Gun Smoke Dedicated & MAME
    • Guscade
Re: wood preperation before overlay goes on?
« Reply #1 on: March 28, 2009, 12:49:59 am »
most people here will tell you to prime it first at a minimum. It should work either way, with that being said It really boils down to your own prefrence. It should just stick to the barewood without any problems, just make sure it's uniform and smooth so you don't have any bubbles or air pockets. As for primer I think I used krylon spray type.
2,370,650 Gun.Smoke

ghettodish

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 303
  • Last login:October 21, 2017, 03:41:58 pm
Re: wood preperation before overlay goes on?
« Reply #2 on: March 28, 2009, 01:02:52 am »
Use a quick-dry primer that you can sand smooth. MDF or plywood that is unsealed can give off gasses that will form bubbles.

pinballwizard79

  • The above mentioned items do not expel strawberries & pretty girls
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1524
  • Last login:May 04, 2014, 09:18:00 pm
  • I sleep by my arcade every Friday
Re: wood preperation before overlay goes on?
« Reply #3 on: March 28, 2009, 01:58:15 am »
I swore the mame marquees website said to paint or clear prior to install.

Thats what i did at least, painted.
"George Bush doesn't care about arcade people"

My FrankenPanel: http://forum.arcadecontrols.com/index.php?topic=110312.0

My Game Room: http://forum.arcadecontrols.com/index.php?topic=81323.0

Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Re: wood preperation before overlay goes on?
« Reply #4 on: March 28, 2009, 02:27:41 am »
I varnished my 1st CP before applying the overlay and I got some nasty bubbles overtime. I have heard good results using primer though as the others suggested.

mytymaus007

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1025
  • Last login:September 18, 2023, 09:58:40 am
  • http://gameroom.atozmicro.com
    • http://gameroom.atozmicro.com
Re: wood preperation before overlay goes on?
« Reply #5 on: March 28, 2009, 07:29:55 am »
what type of primer brush on or should i spray it, any special type


Bender

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1919
  • Last login:November 28, 2016, 08:12:21 pm
    • Happ to Tron Conversion tutorial
Re: wood preperation before overlay goes on?
« Reply #6 on: March 28, 2009, 10:28:54 am »
at least primer

that stuff doesn't stick to raw MDF a all