Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Loading PSU w/ Lightbulb Question  (Read 815 times)

0 Members and 1 Guest are viewing this topic.

kenzo42

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 116
  • Last login:November 23, 2024, 01:11:32 pm
  • I'm a llama!
Loading PSU w/ Lightbulb Question
« on: March 12, 2009, 10:50:43 pm »
I have a Konami Windy. The PSU and isolation transformer are together as one unit. I'll be setting up a AVGA w/ JPAC on it.

1) Do I only need to load the 5v w/ a bulb?
2) There are 2 5volt wires on the Jamma harness. Do I load both or just one.
3) 12v or -5v doesn't need a load?

Thanks.