Author Topic: Visio prints weird (EDIT* New Q) (Read 1374 times)

crashdmj · « **on:** June 23, 2003, 11:28:14 pm »

How can I make it print to the edge of each paper....I tried taking away borders and it still does it......maybe I am doing it wrong?
Derek

u_rebelscum · « **Reply #1 on:** June 24, 2003, 05:21:31 am »

Quote from: crashdmj on June 23, 2003, 11:28:14 pm

How can I make it print to the edge of each paper....I tried taking away borders and it still does it......maybe I am doing it wrong?
Derek

I bet it's the printer related "Page Margin".

Only a very few printers have a zero page margin. Heck, a 1/8" margin is very good; 1/4" is "normal"; but some printers have a minimum of 1/2" to 2/3" margins!

rampy · « **Reply #2 on:** June 24, 2003, 11:01:24 am »

You trim the pages and overlap them, and then tape them together. (or you bring it down to kinko's or work in my case and print it full size on a plotter -- a draft at kinko's of black and white can't be that expensive... I hope)

rampy

AlanS17 · « **Reply #3 on:** June 24, 2003, 11:02:43 am »

You're gonna be hard=pressed to find a printer that can print all the way to the edge, but you'll have better luck in general with photo printers and laser printers.

shmokes · « **Reply #4 on:** June 24, 2003, 11:04:20 am »

All of the newer Epson photo printers will print edge to edge now. I have an Epson 785epx that does (it also makes fantastic prints on photo paper) and you can pick it up for $100 - $150 now, I think. Not that this one job would justify a new printer purchase, but it really is a great printer for the money.

crashdmj · « **Reply #5 on:** June 24, 2003, 12:21:46 pm »

Hmm....I guess I'll just trim and tape.
Derek

Edit* Is there a way to double the size of the visio file (it is currently 1:2) and then save it as a photoshop file so when I work on my CP art it will be true to size??

Frostillicus · « **Reply #6 on:** June 24, 2003, 01:28:59 pm »

Quote from: crashdmj on June 24, 2003, 12:21:46 pm

Edit* Is there a way to double the size of the visio file (it is currently 1:2) and then save it as a photoshop file so when I work on my CP art it will be true to size??

Save it in EPS format if you can (i don't remember if that's possible but it should make for a small file size) and then just open it up in photoshop - then go to IMAGE...IMAGE SIZE...and double the dimensions. You might lose a little resolution, but that's the quickest way to do it I think. You probably won't be using that image in the final overlay anyways.

rampy · « **Reply #7 on:** June 24, 2003, 01:29:58 pm »

why did you use the half scale models in the first place, crash?

just wondering...

Rampy

crashdmj · « **Reply #8 on:** June 24, 2003, 01:40:27 pm »

Cause the full scale was all messed up (stretched for some reason)...im not the brightest
Derek

I think I got it though, I saved it as an jpeg and then reset the image size in photoshop to 48x20...you think that did it.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Visio prints weird (EDIT* New Q) (Read 1374 times)

crashdmj

Visio prints weird (EDIT* New Q)

u_rebelscum

Re:Visio prints weird

rampy

Re:Visio prints weird

AlanS17

Re:Visio prints weird

shmokes

Re:Visio prints weird

crashdmj

Re:Visio prints weird

Frostillicus

Re:Visio prints weird

rampy

Re:Visio prints weird (EDIT* New Q)

crashdmj

Re:Visio prints weird (EDIT* New Q)