Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Help: No one-button esc on x-arcade  (Read 1413 times)

0 Members and 1 Guest are viewing this topic.

dkubarek

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 185
  • Last login:February 25, 2011, 01:00:32 am
Help: No one-button esc on x-arcade
« on: January 05, 2009, 06:09:41 pm »
Just wired the x-arcade BYOAC kit and it works great but lacks a one button esc for quitting emus. No worries with Mame because there is a two button combo, and you can remap Mame. But my hacked emus want a one button esc to quit. The only option I see is programming another channel of the x-arcade, but then every time I power up the cab I have to switch the controls from its default to the other channel using a button. Not a huge issues but it's for smaller kids. Is there an easier way? I never hacked a program but I'm assuming changing the quit button is out of the question.

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7919
  • Last login:August 18, 2025, 07:06:41 pm
Re: Help: No one-button esc on x-arcade
« Reply #1 on: January 05, 2009, 10:17:26 pm »
Just wired the x-arcade BYOAC kit and it works great but lacks a one button esc for quitting emus. No worries with Mame because there is a two button combo, and you can remap Mame. But my hacked emus want a one button esc to quit. The only option I see is programming another channel of the x-arcade, but then every time I power up the cab I have to switch the controls from its default to the other channel using a button. Not a huge issues but it's for smaller kids. Is there an easier way? I never hacked a program but I'm assuming changing the quit button is out of the question.

Can't you just map the emu's 1 button to escape? Isn't that what the x-arcade does when you press 1 + 2 player buttons?

dkubarek

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 185
  • Last login:February 25, 2011, 01:00:32 am
Re: Help: No one-button esc on x-arcade
« Reply #2 on: January 06, 2009, 12:00:13 am »
I have the emus mapped to esc but x-arcade doesn't quit them using the key combo. That must just work for Mame because it works fine there, but I have to use an actual escape key to quit out of other emus.

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7919
  • Last login:August 18, 2025, 07:06:41 pm
Re: Help: No one-button esc on x-arcade
« Reply #3 on: January 06, 2009, 12:11:24 am »

severdhed

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2975
  • Last login:December 14, 2024, 05:01:52 pm
  • RIP Dinosaur Hippo
Re: Help: No one-button esc on x-arcade
« Reply #4 on: January 06, 2009, 12:28:34 am »
my x-arcade controller has 4 different code sets, that you select by sliding a switch on the back of the unit.  i reprogrammed mine a long time ago and i just leave the switch in that position..it starts up with that config every time...no need for manually switching it at all.  of course my x-arcade is a few years old, so they may have changed it since then...
Current Projects:      Zak-Man | TMNT Pedestal | SNES Pi | N64 Odroid
Former Projects:     4 Player Showcase | Donkey Kong | iCade

dkubarek

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 185
  • Last login:February 25, 2011, 01:00:32 am
Re: Help: No one-button esc on x-arcade
« Reply #5 on: January 06, 2009, 10:11:50 am »
severhed, yea, I got the 2.0 edition, I guess and that's one of the things you gotta do. No biggie but it would be great for it to just start up and go. I might ditch my other emus anyway. There are plenty of great games in Mame and I would also run into trouble when it came to saving, loading, etc in other emus.