Author Topic: How to remove Ikari style (LS-30) joysticks? (Read 1064 times)

mehouck · « **on:** January 04, 2009, 03:07:22 pm »

I just aquired a complete Ikari III control panel with joysticks, and am looking to mount them
in a custom CP. One problem, I cant seem to find the trick to remove them....
I have searched the forums, and found reference to removing the E-clips, which I have done,
but that just seems to hold them tight together. I believe that I need to remove the knob.
I also found a reference to a tool needed to remove the center cap.
I tried to stick a bent coathanger in from the back of the knob, but it doesnt seem to push in
far enough to reach the center cap.
Any advice before I use more force than necessary?
Thanks!

Bender · « **Reply #1 on:** January 04, 2009, 11:19:29 pm »

http://forum.arcadecontrols.com/index.php?topic=13028.0

the pics are gone but if you read it you'll get it


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: How to remove Ikari style (LS-30) joysticks? (Read 1064 times)

mehouck

How to remove Ikari style (LS-30) joysticks?

Bender

Re: How to remove Ikari style (LS-30) joysticks?