Author Topic: LED-WIZ/GP No Inputs Working?? (Read 878 times)

lettuce · « **on:** December 27, 2008, 09:11:36 am »

I have one of these hooked up to my bartop, and while im getting my LED lights working i cannot get any on the button inputs to register!! Im used to an I-PAC and this is the first time i have used an LED-WIZ/GP for button input, i believe i have wired the buttons up correcly, but cannot get them to register an input what so ever. Is there a driver of software prog i need to download to get the inputs to work??

I have noticed on the right hand side of the board there is a double screw terminal that is listed as 'Bank Voltage Select' With 1 scre terminal listed as 1-8 and the other 9-16

ideft · « **Reply #1 on:** December 28, 2008, 10:47:40 pm »

where are they not working??

go into "Control panel" and then click on gamepads to see if it is being recognized.
Enter the properties of the gamepad to see if the buttons are working. if not then check your grounds for loose wires.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: LED-WIZ/GP No Inputs Working?? (Read 878 times)

lettuce

LED-WIZ/GP No Inputs Working??

ideft

Re: LED-WIZ/GP No Inputs Working??