Main Woodworking Reviews Software Monitor/Video Maximus Arcade
Audio/Jukebox/MP3 Project Announcements Artwork Consoles Buy/Sell/Trade Meet Up
Arcade Miscellaneous Everything Else Politics n Religion Forum Discussion Wiki Discussion GroovyMAME
DOS/WinCab Merit/JVL Touchscreen Automated Projects Driving & Racing Project Arcade Old Boards
Linux Restorations Pinball MaLa Frontend controls.dat Old Archives
    Retail Vendors    

Unread posts | New Replies | Recent posts | Arcade | Rules | Chatroom | Wiki | File Repository | RSS


  

Author Topic: How to use dip switches on Killer Instinct 1 *actual cabinet*  (Read 1047 times)

0 Members and 1 Guest are viewing this topic.

MyCatSucks

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
How to use dip switches on Killer Instinct 1 *actual cabinet*
« on: December 10, 2008, 04:09:30 pm »
I am hoping someone can help me with the dip switches on my recent acquisition, Killer Instinct. I have the Manual and it shows the different dip switch settings but does not explain how to change them. I have not been able to find any FAQ on how to adjust dip switches either. The manual also explains that to turn some dip switches on, they must be set to "off".

Do I have to actually change switches on the PCB inside the cabinet? I could not find a way to change them in the Settings menus.

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+22)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12945
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: How to use dip switches on Killer Instinct 1 *actual cabinet*
« Reply #1 on: December 10, 2008, 04:13:44 pm »
Yes, you change switches on the PCB in the cabinet itself.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+55)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 9242
  • Globally Moderated
Re: How to use dip switches on Killer Instinct 1 *actual cabinet*
« Reply #2 on: December 11, 2008, 07:51:14 am »
see this picture of my burnt out KI2?




the dip switches are in the 2 red plastic areas to left, same spot on a KI1 I believe (Im at work and my broken KI1 board is at home)


I don't need no arms around me.
And I don't need no drugs to calm me.


Malenko's Project Tracker Thread

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29