got mine, using it right now... same problem as previously noted very difficult to get touch at edges of screen.
this is not due to bad calibration or fault though it is because of the depth of the bezel, its virtually impossible to get you finger close enough to the edge of the screen to close a window that is maximised. the edge of the bezel lines up exactly with the edge of the screen but is about 1/2 inch deep.
I will take my bezel off and look inot enlarging the hole by around 1/4 inch to eliminate this problem.
screen itself is crisp and bright and working perfectly.
they are decased (not actually built with a case) as they are designed for kiosks etc, 3 choices on mounting...
1. metal bracket and ears, they come with a metal bracket and what can only be described as adjustable ears to allow mounting.
2. screws through bezel, there are a series of mounting holes on the bezel to allow direct mounting to a panel
3. vesa, there are standard vesa mounting holes on the back of these monitors