Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: side art not sticking well  (Read 1821 times)

0 Members and 1 Guest are viewing this topic.

Trebeck

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 418
  • Last login:April 19, 2025, 01:05:29 pm
  • "The Arcade" - Build #4
side art not sticking well
« on: November 23, 2008, 03:27:41 pm »
Hey all,

I had some side art prints done from mame marquees and they look really good.  The problem is that it's getting cold in my shop and when I put them on they peeled off soon after.  Now I have some masking tape keeping the corners tight but I think I need something stronger.  Any suggestions on a good glue that won't damage the prints?
My cab is painted with acrylic.

Beck

Obi-Wan

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:November 29, 2012, 08:06:45 pm
Re: side art not sticking well
« Reply #1 on: November 25, 2008, 10:36:53 am »
I usually apply the artwork then run an iron (for cloths) over it to activate the adhesive.  Make sure you lay a t-shirt down so the hot iron doesn't come into direct contact with your artwork.

I can't take credit for this, I believe Knievel posted this tip first.

mrclean

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1532
  • Last login:August 10, 2022, 08:30:36 am
  • World Record Holder for Gun Smoke Dedicated & MAME
    • Guscade
2,370,650 Gun.Smoke

Trebeck

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 418
  • Last login:April 19, 2025, 01:05:29 pm
  • "The Arcade" - Build #4
Re: side art not sticking well
« Reply #3 on: November 25, 2008, 01:07:43 pm »
Sweet! Thanks you two.  Ill try both

FrizzleFried

  • no one listens to me anyway.
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5145
  • Last login:March 07, 2025, 10:44:09 am
    • Idaho Garagecade
Re: side art not sticking well
« Reply #4 on: November 26, 2008, 08:35:57 am »
Heat gun may work as well...it sounds like it's too cold for the adhesive to properly develop a hold.
Visit my arcade blog at: www.idahogaragecade.com (Updated 10-28-21)

Trebeck

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 418
  • Last login:April 19, 2025, 01:05:29 pm
  • "The Arcade" - Build #4
Re: side art not sticking well
« Reply #5 on: November 27, 2008, 11:41:06 pm »
OK I did the iron and it worked for a day and then it started to peel so I think I need to go with the adhesive.  Crap.  I'm just worried that it will ruin the graphic or something.   I'll email mame marquees and see what they say and get back to you all.