Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Lighted Control Panel Overlay Surface  (Read 2304 times)

0 Members and 1 Guest are viewing this topic.

whynotpizza

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 148
  • Last login:March 23, 2025, 10:01:28 am
  • I'm a llama!
Lighted Control Panel Overlay Surface
« on: November 21, 2008, 11:32:17 pm »

Ok, bunch of questions lately on lighting. :)

Anyone know what would workk best to try and get the lightning bolt in my control panel overlay to "light-up" in the dark?

http://www.mamemarquees.com/blue-lightning-control-panel-from-p-194.html

Should I paint the surface with luminescent paint? Use a black-light?

Any way to get light to be trapped (and light-up the bolts) between the overlay surface and the lexan which will be placed on top?

Any ideas are welcome. :)

  David

Missile

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:April 13, 2009, 09:02:32 pm
Re: Lighted Control Panel Overlay Surface
« Reply #1 on: November 22, 2008, 01:11:35 am »
My car has a tiny little LED on the rearview mirror to light up the shifter area.  I'm thinking about putting a couple of those hidden by the bottom of my overhead marquee on the build I'm working on to accomplish a similar effect.  My car doesn't require more than a 1/4" hole for its shifter light.

Just a thought.
« Last Edit: November 22, 2008, 01:13:12 am by Missile »

fixedpigs

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 627
  • Last login:Yesterday at 11:12:22 am
  • warning: drew can't handle my avatar...
Re: Lighted Control Panel Overlay Surface
« Reply #2 on: November 22, 2008, 09:56:27 am »
My car has a tiny little LED on the rearview mirror to light up the shifter area. 

odd...does your car have a light to illuminate the clutch/brake/& gas pedals too...?

who looks at the shifter to shift...?

 :dizzy:

Ginsu Victim

  • Yeah, owning a MAME cab only leads to owning real ones. MAME just isn't good enough. It's a gateway drug.
  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10092
  • Last login:June 28, 2025, 10:45:55 pm
  • Comanche, OK -- USA
Re: Lighted Control Panel Overlay Surface
« Reply #3 on: November 22, 2008, 09:59:57 am »
My 08 Honda CR-V has the same blue light thingy.

erictrumpet

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 375
  • Last login:February 17, 2016, 11:59:23 am
Re: Lighted Control Panel Overlay Surface
« Reply #4 on: November 22, 2008, 10:32:21 am »
David, you may have answered your own question - if you got some special white paint from here http://www.blacklight.com you could paint it on the lightning bolt with a tiny little pinstriping brush, and in normal light it would appear normal but under a blacklight it would glow like frickin crazy! I've thought about putting a blacklight in the speaker areas of my cab (in the underside of the marquee overhang) - at that website, they also have many different blacklight bulb types, so I thought of making a recessed "spot" light blacklight to shine from above and bathe the cp in spooky glowiness. :)

Eric.


Sardu

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 101
  • Last login:April 08, 2023, 05:45:54 pm
Re: Lighted Control Panel Overlay Surface
« Reply #5 on: November 22, 2008, 10:38:05 am »
I wonder if 3/4" or 1" thick plexiglass like the stuff found here:
http://www.estreetplastics.com/

could be used as a CP.  Then you just add a light inside like a lightbox.


Or get your overlay printed with glow in the dark paper or ink

Ginsu Victim

  • Yeah, owning a MAME cab only leads to owning real ones. MAME just isn't good enough. It's a gateway drug.
  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10092
  • Last login:June 28, 2025, 10:45:55 pm
  • Comanche, OK -- USA
Re: Lighted Control Panel Overlay Surface
« Reply #6 on: November 22, 2008, 11:32:33 am »
Sardu - Maybe you should have a signature that says, "Not THAT Sardu"

If you don't know what I'm talking about, look up NESticle, Genecyst, and Callus. (Oh, and Bloodlust Software)

whynotpizza

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 148
  • Last login:March 23, 2025, 10:01:28 am
  • I'm a llama!
Re: Lighted Control Panel Overlay Surface
« Reply #7 on: November 22, 2008, 11:54:38 am »

Good suggestions guys, although I was thinking along the following lines and using a lighted ON or OFF system.

Check this stuff out: http://www.elbestbuy.com/2hibrperfo.html

It would require me cutting a 2.3mm groove in the lightning bolts using some sort of dremel or router (very careful is the word!)  :)  but then I could turn ON or OFF as needed. I also like the fact that I am not using a BLACKLIGHT - those things get into your eyes and bother you I seem to recall, but maybe not.

Ah the choices are endless and will certainly take time to work thru testing the options!

As a side note, the link above also sells this LIVE TRACK system which really looks cool to add around the cabinet for detailing.
  http://www.elbestbuy.com/newlwimosy.html

Sardu

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 101
  • Last login:April 08, 2023, 05:45:54 pm
Re: Lighted Control Panel Overlay Surface
« Reply #8 on: November 22, 2008, 12:35:24 pm »
Sardu - Maybe you should have a signature that says, "Not THAT Sardu"

If you don't know what I'm talking about, look up NESticle, Genecyst, and Callus. (Oh, and Bloodlust Software)

haha, yep.. I remember him.  Wasn't it rumored that we went to work for EA or something?

Anyway, been using "Sardu" from "Bloodsucking Freaks" movie on various sites, games, etc, since '98.   ;D

Tim N.

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 60
  • Last login:December 06, 2016, 04:49:21 pm
    • RalphWiggum dot Net
Re: Lighted Control Panel Overlay Surface
« Reply #9 on: November 22, 2008, 10:29:53 pm »

Good suggestions guys, although I was thinking along the following lines and using a lighted ON or OFF system.

Check this stuff out: http://www.elbestbuy.com/2hibrperfo.html

It would require me cutting a 2.3mm groove in the lightning bolts using some sort of dremel or router (very careful is the word!)  :)  but then I could turn ON or OFF as needed. I also like the fact that I am not using a BLACKLIGHT - those things get into your eyes and bother you I seem to recall, but maybe not.

Ah the choices are endless and will certainly take time to work thru testing the options!

As a side note, the link above also sells this LIVE TRACK system which really looks cool to add around the cabinet for detailing.
  http://www.elbestbuy.com/newlwimosy.html


David, you may have better luck with EL Tape rather than EL line... Have a look at some of the work here-
http://electroluminescence-inc.com/howtouseEL.htm

The tape is going to be much flatter and would fit between the artwork and Plexi rather easily...

fixedpigs

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 627
  • Last login:Yesterday at 11:12:22 am
  • warning: drew can't handle my avatar...
Re: Lighted Control Panel Overlay Surface
« Reply #10 on: November 23, 2008, 10:39:24 am »

Missile

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:April 13, 2009, 09:02:32 pm
Re: Lighted Control Panel Overlay Surface
« Reply #11 on: November 23, 2008, 09:26:12 pm »
My car has a tiny little LED on the rearview mirror to light up the shifter area. 

odd...does your car have a light to illuminate the clutch/brake/& gas pedals too...?

who looks at the shifter to shift...?

 :dizzy:

Just a standard feature on my vehicle, I didn't put it there or anything  ;)

Hey whatdya know, I found a pic.  As I said the little LED is built into the rearview mirror so that part isn't visible, but you can get a good idea of the effect.
 
« Last Edit: November 23, 2008, 09:34:15 pm by Missile »